Obvious 发表于 2025-3-23 10:02:31
http://reply.papertrans.cn/17/1667/166693/166693_11.pngSPECT 发表于 2025-3-23 14:52:09
http://reply.papertrans.cn/17/1667/166693/166693_12.pngpus840 发表于 2025-3-23 20:21:15
https://doi.org/10.1007/978-3-531-90530-3ave been to provide a review on tribological performance of polymer and its composites which deals with the application of polymer composite in automotive application and recent developments of polymer composite in tribo-performance. It also deals with the effects of different process and material pterazosin 发表于 2025-3-24 00:22:25
Governance in der Sozialwirtschafting irregular silica sand at different impingement angles, impact velocities and environment temperatures. It is observed that the composite C1 with 10 μm filler size shows the maximum tensile and flexural strength 45.564 ± 0.72 MPa and 73.16 ± 1.34 MPa respectively. It is also observed that the com佛刊 发表于 2025-3-24 02:35:46
Quellen der Governancediskussion,que with different weight percent of silicon nitride (0, 10, 20 and 30 wt%). 10 layers of carbon fiber are stacked in the glass mould for the fabrication of the composite. The erosion test is performed with varying impingement angle from 45–90°, impact velocity from 30 to 60 m/s and filler content fpaleolithic 发表于 2025-3-24 09:37:18
Gunnar Folke Schuppert,Michael Zürnrts. The lubrication by the grease help in separation of the contacting surfaces to achieve low friction, wear, and long life. In the last decades, the researchers have contributed for enhancing the tribological performance of the grease with different fillers. In recent time the nano-additives is g魔鬼在游行 发表于 2025-3-24 12:50:21
Governance in einer sich wandelnden Weltth techniques are necessary for designing lubricating film at the nanometer scale to control the surface properties of materials at nano/micro scales. Further, nanoparticles of self-lubricious materials are also used to prepare laboratory grease and are compared with traditional industrial grease. T拱墙 发表于 2025-3-24 16:11:10
Governance in einer sich wandelnden Welt0% at texture density of 22.5% and high loads. In dry condition there was no significant change in COF but the specific wear rate decreased by 64.69% in 22.5% texture density. In the present set of experiments carried out at lighter load (120 N), both 7.5 and 15% texture densities exhibited better r组装 发表于 2025-3-24 19:43:05
http://reply.papertrans.cn/17/1667/166693/166693_19.png雪上轻舟飞过 发表于 2025-3-25 01:32:47
http://reply.papertrans.cn/17/1667/166693/166693_20.png