Banquet
发表于 2025-3-25 04:47:03
Sand Blast Surfaces. Depending upon the size of the blasted particles and their velocity, the surface may be extremely rough, or, alternatively, less rough with a fine overall structure. Irrespective of the amplitude of the roughness encountered, the random nature of the surface would be similar throughout all types o
follicle
发表于 2025-3-25 08:58:03
Polished Surfaces multidirectional actions, the underlying evidence of the previous machining process, in this case fine grinding, is still present. The peak to valley roughness (. = 0.6 µm), and the average roughness (. = 0.07 µm), indicate that a very smooth surface has been produced with a form error which is typ
愉快吗
发表于 2025-3-25 13:36:10
Cylindrically Ground Surfacesnding wheel. This variation is generally random by nature. These micro-roughness components of the surface are also associated with the nonhomogeneity within the body of the material itself which contributes to a variation in the cutting forces and hence the asperity levels within the surface. Some
Basilar-Artery
发表于 2025-3-25 18:21:25
M. J. Chasco,E. Martín-Peinador. Depending upon the size of the blasted particles and their velocity, the surface may be extremely rough, or, alternatively, less rough with a fine overall structure. Irrespective of the amplitude of the roughness encountered, the random nature of the surface would be similar throughout all types o
apropos
发表于 2025-3-25 22:18:31
Zafer Ercan,Antony W. Wickstead multidirectional actions, the underlying evidence of the previous machining process, in this case fine grinding, is still present. The peak to valley roughness (. = 0.6 µm), and the average roughness (. = 0.07 µm), indicate that a very smooth surface has been produced with a form error which is typ
引导
发表于 2025-3-26 00:23:05
Wolfgang Desch,Stig-Olof Londennding wheel. This variation is generally random by nature. These micro-roughness components of the surface are also associated with the nonhomogeneity within the body of the material itself which contributes to a variation in the cutting forces and hence the asperity levels within the surface. Some
BROTH
发表于 2025-3-26 07:42:06
Book 1990nd the resulting surface topography, and (2) the relationship between topography and function. It is also clear that The most common method of determining surface characteristics is an adequate understanding of these two issues can only be through the use of a stylus-based measuring instrument. The
暴露他抗议
发表于 2025-3-26 09:52:16
ufacture and the resulting surface topography, and (2) the relationship between topography and function. It is also clear that The most common method of determining surface characteristics is an adequate understanding of these two issues can only be through the use of a stylus-based measuring instrument. The 978-94-011-7772-6
infelicitous
发表于 2025-3-26 15:52:19
http://reply.papertrans.cn/17/1644/164329/164329_29.png
尖
发表于 2025-3-26 18:43:32
Interpolation between H1 and L∞dertaken at a bulk machining setting. The surface has an extremely random structure, caused by the electrical discharges randomly impinging on the surface through the di-electric fluid during the machining process. As both the distribution and the intensity of the discharge are affected by the suspe