爱管闲事 发表于 2025-3-25 03:56:41
Channel Coding Basics,This chapter gives a short overview of the basic principle of linear block codes and possible decoding methods. As this treatise only deals with a subset of existing channel codes, only a short primer with small examples are given.scotoma 发表于 2025-3-25 07:44:47
http://reply.papertrans.cn/17/1614/161337/161337_22.pngaspersion 发表于 2025-3-25 13:26:19
,Evolutionsstrategie ‚Sozietät‘,l for the entire transceiver chain can be very complex. Thus it is essential to make further abstractions of this transmission chain model. As mentioned, the task of the inner transceiver is to create a good time discrete channel from the inner transmitter input to the inner receiver output.教育学 发表于 2025-3-25 16:35:51
http://reply.papertrans.cn/17/1614/161337/161337_24.png是突袭 发表于 2025-3-25 23:44:00
,Evolutionsstrategie ‚Sozietät‘,l for the entire transceiver chain can be very complex. Thus it is essential to make further abstractions of this transmission chain model. As mentioned, the task of the inner transceiver is to create a good time discrete channel from the inner transmitter input to the inner receiver output.HERE 发表于 2025-3-26 01:01:31
https://doi.org/10.1007/978-3-658-04320-9ts possible hardware realization we will introduce in this chapter the basic steps for a hardware design. An entire receiver is large system and comprises many different functionalities. Combining all of them on a single die yields a so called System-on-a-Chip (SoC). The SoC design requires the know多产鱼 发表于 2025-3-26 05:13:02
http://reply.papertrans.cn/17/1614/161337/161337_27.pngAGATE 发表于 2025-3-26 09:01:01
Gemischte Verhaltensstrategien,oding LDPC codes. However, also due to their computational and implementation complexity the iterative decoding was largely ignored. Before the introduction of turbo codes only a small group of researchers were interested in the field of iterative decoding, e.g. P. Elias , M. Tanner . With the表两个 发表于 2025-3-26 13:00:33
,Evolutionsstrategie ‚Sozietät‘,d the modulation. So far, the transmission of information was assumed to be done via one pair of antennas (one on the sender side and one on the receiver side), which means one symbol was sent in each time slot. However, as introduced in Sect. 2.4 it is possible to transmit multiple symbols via mult颠簸下上 发表于 2025-3-26 19:58:05
http://reply.papertrans.cn/17/1614/161337/161337_30.png