AORTA
发表于 2025-3-26 23:38:02
Planning and slotting,Planing is a cutting technology in which the workpiece is machined in slices with a single blade tool, the planing tool.
SLUMP
发表于 2025-3-27 01:12:58
Drilling,Drilling is a cutting procedure designed to generate holes predominantly with a two-flute tool, the twist drill. When drilling on the drilling machine, the tool carries out the feed- and the cutting motions. If the hole is machined on a turning- or automatic lathe, then the workpiece performs the cutting motion.
cyanosis
发表于 2025-3-27 06:55:45
Sawing,Sawing is a metal cutting procedure in which the multi-edged tool carries out both the cutting and the feed motions.
AMBI
发表于 2025-3-27 13:09:58
http://reply.papertrans.cn/16/1600/159916/159916_34.png
创新
发表于 2025-3-27 16:45:47
Broaching,Broaching is a metal cutting technique with a multi-edged tool in which the tool performs the cutting motion. This method functions without any feed motion due to the offset of the cutting teeth on the broaching tool.
Indelible
发表于 2025-3-27 19:33:00
Grinding,Grinding is a metal cutting procedure in which a multi-edged tool, whose cutting edges are geometrically undefined, removes the chips.
AER
发表于 2025-3-27 22:22:52
Abrasive cutting,Abrasive cutting is a grinding procedure which is exclusively intended for parting off material, as in sawing.
共和国
发表于 2025-3-28 05:24:36
http://reply.papertrans.cn/16/1600/159916/159916_38.png
indubitable
发表于 2025-3-28 06:32:09
http://reply.papertrans.cn/16/1600/159916/159916_39.png
时代
发表于 2025-3-28 11:32:34
Superfinishing (shortstroke honing),The superfinishing method, also called superhoning or shortstroke honing, is a precision finishing pro- cess in which a workpiece rotates and an abrasive wheel, which is pressed against the workpiece, simultaneously performs a rapid longitudinal vibration of only few millimetres (Figure 17.1).