encomiast
发表于 2025-3-23 11:12:26
E.W. LaFary,J. Gatrell,N. Reid,P. Lindquistalinity) of the water. The heavier (or more dense) the fluid, the shorter the column needed to equalize a particular pressure. For example, the height of a column of 15-pound drilling mud required to offset a given pressure in a reservoir would be about half that of a column of water.
愤世嫉俗者
发表于 2025-3-23 14:19:22
The Potentiometric Surface,alinity) of the water. The heavier (or more dense) the fluid, the shorter the column needed to equalize a particular pressure. For example, the height of a column of 15-pound drilling mud required to offset a given pressure in a reservoir would be about half that of a column of water.
jungle
发表于 2025-3-23 21:42:23
Hydrogeological Conditions, only, the pressure resulting from the weight of overlying fluids, as discussed earlier. As anyone who has swum to the bottom of a deep lake has felt, the pressure increases markedly with depth below the surface where the fluid pressure is zero.
遍及
发表于 2025-3-24 01:40:37
http://reply.papertrans.cn/16/1599/159857/159857_14.png
Astigmatism
发表于 2025-3-24 06:13:19
The Potentiometric Surface,in a subsurface reservoir in terms of the elevation to which a column of water would rise above a reference datum within a vertical tube. We refer to this as “head” as illustrated in the model in Figure 2–1. The hydraulic “head” is an approximation of the potential energy of the water at the point c
CULP
发表于 2025-3-24 06:45:46
http://reply.papertrans.cn/16/1599/159857/159857_16.png
切碎
发表于 2025-3-24 13:30:13
Hydrocarbon Entrapment Potential Constructions (,),tion of any hydrocarbon-water interfaces in associated reservoirs. The relationship is one that depends principally upon the . between the densities of the underlying water phase and the overlying oil or gas. The basic geometric relationships are illustrated in Figure 6–1, a cross-section that shows
Jubilation
发表于 2025-3-24 15:37:11
Entrapment Potential Cross-Sections,t elevation above a datum. The intersections of . with the top of the structure define the structure contours. The “contour interval” is ∆.. The same structure with the traces of corresponding water isopressure surfaces is shown in Figure 7–2. Since the system is hydrostatic the isopressure lines ar
江湖骗子
发表于 2025-3-24 20:44:31
Economics, Environments & Ethics, only, the pressure resulting from the weight of overlying fluids, as discussed earlier. As anyone who has swum to the bottom of a deep lake has felt, the pressure increases markedly with depth below the surface where the fluid pressure is zero.
TAG
发表于 2025-3-25 00:08:28
http://reply.papertrans.cn/16/1599/159857/159857_20.png