persistence
发表于 2025-3-28 17:24:34
http://reply.papertrans.cn/16/1596/159507/159507_41.png
枯燥
发表于 2025-3-28 18:54:58
Microscopic and Magnetic Investigations in Sputtered Sm-Fe Thin Filmsrown with varying argon gas pressures, namely 5, 10 and 15 m.Torr, and keeping the sputtering power constant at 100 W. All the films were found to be amorphous in nature irrespective of the processing conditions. Microscopic investigation of film surface showed an island kind of surface morphology i
Priapism
发表于 2025-3-28 23:25:42
Expanding the Application Space of Ion Microscopyof existing workflows continue to expand the large application space already covered today by FIB, FIB-SEM, and FIB-FIB solutions enabling improved or even completely new workflows for sample preparation and microstructure characterization. At one end of the FIB application space, the recent additio
笨重
发表于 2025-3-29 05:35:56
Electron Microscopy: An Important Tool for Preparation and Characterization of Asymmetric Ceramic-Poas functional layer material over modified alumina-based ceramic substrate. The membrane was found to exhibit a water permeability of 3.9-3.1 L m-2 h-1 bar-1 and a low molecular weight cut-off (< 2000) suggesting its nanofiltration nature toward contaminant rejection. The membrane demonstrated a max
optic-nerve
发表于 2025-3-29 11:15:25
Development of Thin Aluminide Coatings on Alloy 800 Substratend penetration depth of ~0.1 and 11 µm, respectively. A good adherence was recorded for thin layers as no peeling off was noticed, which was confirmed by acoustic emission signals. The exposure of magnetron-sputtered + thermally treated alloy substrates to 70% K.SO. + 30% KCl salts at 973 K in air r
Tonometry
发表于 2025-3-29 14:41:56
Deformation Behavior of Inconel 617 Alloy Under Monotonic and Cyclic Loadingn amplitudes. Increase in temperature of testing had deleterious influence on fatigue life. Cyclic hardening at RT was attributed to, the existence of pile up of dislocations in planar array in slip bands, the interaction of dislocations with the fine carbide and γ׳ particles at 750 ℃ and with the c
大方不好
发表于 2025-3-29 19:18:47
TEM Studies of Segregation in a Ge–Sb–Te Alloy During Heatingh after heating. Morphological and structural evolutions were captured during heating inside an aberration corrected environmental TEM equipped with a high-speed camera under a low-dose conditions to minimize beam-induced changes in the samples. Microchemical studies were carried out employing Chemi
老巫婆
发表于 2025-3-29 20:06:52
Hot Deformation Behavior of ,-TiAl-Based Ti–45Al–8Nb–6Cr–0.2B Alloy in the , + , Phase Fieldatures. Microstructural evolution of the deformed samples indicates that the flow softening corresponds to the dynamic recrystallization (DRX). DRX has been found to occur preferentially in the coarse lath boundary of the TiAl phase and also within elongated .(B2)-grains. It has been shown that exte
Rejuvenate
发表于 2025-3-30 02:47:47
http://reply.papertrans.cn/16/1596/159507/159507_49.png
青少年
发表于 2025-3-30 04:57:27
Microstructural Attributes to the Stability of ‘Brass’-Texture During Cold Rolling of AA7010 High Stsis of microtexture in conjunction with TEM studies establishes that the rotation around the . axis within the shear band area is facilitated by the change of the co-planar slip systems to a single slip. This can lead to a texture development near the Bs-S regions of the β-fibre in accordance with t