LIMIT
发表于 2025-3-30 09:43:13
Testing of DC/DC Converters for ,V Electric Vehicleson, whereas sustained electrical power is kept high. This paper discusses a preliminary version of the converter, with experimental results from measurements, and presents the final chip architecture, with some simulation result data.
Constitution
发表于 2025-3-30 13:07:25
A Calorimetry Based System for Measuring the Power Losses of Switching Power Devicese, so that heat entirely flows through the calorimeter. As the dissipated power measurement relies on the measurement of a heat flow, the apparatus is particularly suitable, and provides reliable results, in fast switching devices, regardless of the switching frequency, thus overcoming the problems associated with direct electrical measurements.
defendant
发表于 2025-3-30 16:46:47
ZnO-rGO Composite Thin Film Resistive Switching Device: Emulating Biological Synapse Behaviorod resistive switching (RS) characteristics with good On-OFF was also observed with good stability. The fabricated device has characteristics similar to that of biological synaptic plasticity and can be used for making electronics dynamical synapse.
Left-Atrium
发表于 2025-3-30 22:41:05
Conference proceedings 2018e. It covers a broad spectrum of application domains, from automotive to space and from health to security, while devoting special attention to the use of embedded devices and sensors for imaging, communication and control. The book is based on the 2016 ApplePies Conference, held in Rome, Italy in S
假
发表于 2025-3-31 02:25:52
Long-Range Radio for Underground Sensors in Geothermal Energy Systemsrmation of underground temperature is necessary to assess the thermal potential of the soil, for maximizing the efficiency of the SGS. The challenge is to get information at different depths (sometimes up to −100 m), to transmit data wirelessly in rural areas where conventional wireless connections
BAN
发表于 2025-3-31 05:31:55
Embedding Monitoring Systems for Cured-In-Place Pipeste are monitored, using MEMS sensors. The flow-rate is evaluated by measuring pipe vibration, with a 3 axis accelerometer, induced by turbulence when fluid flows within the tube. The sensors are embedded, during the curing process of the cured-in-place pipes, in the pipes wall making the system suit