growth-factor
发表于 2025-3-26 22:11:54
The Flipped Voltage Follower: Theory and ApplicationsF and its variations in analog and mixed signal (AMS) circuit design have increased continuously over the last few years. These are specially promising in deep submicrometer CMOS technology. In 2004 the paper ”The Flipped Voltage Follower: A useful cell for low-voltage low-power circuit design” was
photophobia
发表于 2025-3-27 02:25:49
Synthesis of Analog Circuits Using Only Voltage and Current Followers as Active Elementsity gain current followers (CF)) as alternatives to other more complex building blocks in the design of analog circuits. This has been possible due to the advances made in IC technology. It is possible to design VFs and CFs providing wider bandwidth, lower power consumption and simpler architectures
协奏曲
发表于 2025-3-27 06:25:55
Design of Setable Active Lossy Inductors-circuits using signal-flow graphs in the two-graph version, is the basis of this method. The idea consists of using exclusively RC-elements and the newly introduced ’active switches’. A second novel idea is presented; it consists of the reduction of the complexity of the equivalent active circuits,
chisel
发表于 2025-3-27 12:46:36
MIDAS: Microwave Inductor Design Automation on Siliconral inductors, transformers and transmission lines, which are commonly not available in the process design-kits of the technologies. Moreover, the design and simulation of such devices are not addressed adequately by means of systematic techniques and automation.
会犯错误
发表于 2025-3-27 16:01:22
LC-VCO Design Challenges in the Nano-Eration systems possible. Additionally, higher speed, lower power consumption and area reduction has been reached. Due to the high-density integration needs, as well as to low cost fabrication, RF applications, such as the .-voltage controlled oscillator (.), are usually implemented in CMOS technology.
Phagocytes
发表于 2025-3-27 19:44:51
Foundations of differentiable dynamics,that contain analog and digital components at the same time. Such a situation occurs, e.g., in mixed-signal circuits. First, the approach analyzes the circuit for basic analog and digital building blocks. Next, a structural signal flow analysis partitions the circuit into an analog and digital part.
Cumulus
发表于 2025-3-28 01:15:18
http://reply.papertrans.cn/16/1559/155881/155881_37.png
Abjure
发表于 2025-3-28 05:02:34
http://reply.papertrans.cn/16/1559/155881/155881_38.png
仔细阅读
发表于 2025-3-28 07:46:30
https://doi.org/10.1007/BFb0087235que for systematically comparing two analog circuits. The comparison data presents the similar and distinguishing performance characteristics of two circuits with respect to DC-gain, bandwidth, common-mode rejection ratio (CMRR), noise, and sensitivity. The comparison data is important for getting i
Ige326
发表于 2025-3-28 10:47:54
http://reply.papertrans.cn/16/1559/155881/155881_40.png