来自于
发表于 2025-3-23 09:43:40
RF CMOS Modellingt simulation. Here clear experimental results will be used to illustrate the accuracy and limitations of state-of-the-art compact models. Wherever possible, improvements or macro models that can be used for circuit simulation will be presented.
arthrodesis
发表于 2025-3-23 13:59:18
http://reply.papertrans.cn/16/1559/155824/155824_12.png
单调性
发表于 2025-3-23 19:45:22
Recent Developments in BSIM for CMOS RF ac and Noise Modeling BSIM3v3 were proposed and evaluated with 2-D simulations and experimental data. Good agreement has been achieved in the GHz range. These models will enable the accurate simulations of new emerging CMOS RF LSI communication systems using SPICE.
健壮
发表于 2025-3-23 23:31:26
http://reply.papertrans.cn/16/1559/155824/155824_14.png
deriver
发表于 2025-3-24 02:22:37
Book 1999ation systems RF MOST models Integrated filters and oscillators The other topics, which have been coverd before, are: 1992 Operational amplifiers A-D Converters Analog CAD 1993 Mixed-mode A+D design Sensor interfaces Communication circuits 1994 Low-power low-voltage design Integrated filters Smart p
breadth
发表于 2025-3-24 07:40:01
http://reply.papertrans.cn/16/1559/155824/155824_16.png
Tartar
发表于 2025-3-24 14:39:09
OUDFRIESE TAAL- EN RECHTSBRONNENd and compared to measurements made on a 0.25 p m CMOS process. The Y-parameters and transit frequency simulated with this scalable model versus frequency, geometry and bias are in good agreement with measured data The non-quasi-static effects and their practical implementation in the Spice subcircu
bronchiole
发表于 2025-3-24 18:33:55
http://reply.papertrans.cn/16/1559/155824/155824_18.png
悬挂
发表于 2025-3-24 19:31:26
http://reply.papertrans.cn/16/1559/155824/155824_19.png
使迷惑
发表于 2025-3-25 00:51:50
Analog , Polyphase Filter and Mixer Design for Large Image Rejectiont now the image consists of some other unrelated channel two times IF away in frequency, which may be substantially larger than the desired channel. All of a sudden, an image rejection of up to 60 dB becomes necessary.