Defraud
发表于 2025-3-23 12:08:06
https://doi.org/10.1007/978-3-8350-5502-5The motors that create motion in the robot articulations are called .. There are three main types of actuator, each associated with a different form of energy: . and ..
重力
发表于 2025-3-23 17:13:38
Ergebnisse der empirischen Untersuchung,A robot can be equipped with two types of sensor, ., which establish its configuration in its own set of coordinate axes, and ., which allow the machine to position itself relative to its environment. This chapter is concerned with the most commonly used types of internal sensor, which measure movement, speed, acceleration and stress.
摆动
发表于 2025-3-23 20:32:43
http://reply.papertrans.cn/16/1555/155465/155465_13.png
考得
发表于 2025-3-24 00:20:32
Research in Management Accounting & ControlStrictly speaking, a robot must go through four major stages when performing a task; it must:
Latency
发表于 2025-3-24 06:23:32
http://reply.papertrans.cn/16/1555/155465/155465_15.png
JADED
发表于 2025-3-24 08:29:54
Robotics: an introduction,As a result of the great advances of the last few years many industrial processes have become largely automated, with the human operator playing an ever decreasing role. The fully automated and unmanned factory is probably now only a few decades away.
群居动物
发表于 2025-3-24 13:56:02
Robots and robots in use,The fact that the word ‘robot’ exists in many languages is evidence of its recent coinage, despite the fact that it represents the fulfilment of an age-long aspiration: to create a device that can replace man in everything he cannot or does not wish to do himself, but still needs or wants to do, without presenting any threat to his authority.
官僚统治
发表于 2025-3-24 16:59:20
http://reply.papertrans.cn/16/1555/155465/155465_18.png
deciduous
发表于 2025-3-24 20:17:49
http://reply.papertrans.cn/16/1555/155465/155465_19.png
upstart
发表于 2025-3-24 23:25:48
Control based on the kinematic model,It has been shown that the geometrical model cannot always be used, for example when a robot is non-resolvable, and gives an approximation that is not encountered in practice. This sometimes results in control problems (speed control, accuracy and overshooting etc).