从属
发表于 2025-3-25 03:33:10
Development of a Low-Cost Wearable Prevention System for Musculoskeletal Disorders Using Inertial Meifference between the values measured by participants and the values obtained directly from the wearable is 2.44°, which has the same accuracy level of the commercial products. The proposed device is scalable enough to be iterated by further improvements, including conductive fabric 3D printing tech
recession
发表于 2025-3-25 07:39:47
Fingers’ Biomechanical Analysis with Smartphone User Testsn positions of touch, for five orders dots disposed on the smart phone screen, and applied force were no linear. The quantitative relationships between force and fingers’ displacements have been extracted by using linear regression analysis. Based on the comparison of force-displacement relationship
abolish
发表于 2025-3-25 15:08:27
http://reply.papertrans.cn/16/1504/150308/150308_23.png
Eructation
发表于 2025-3-25 16:20:47
http://reply.papertrans.cn/16/1504/150308/150308_24.png
服从
发表于 2025-3-25 22:35:51
Experimental and Numerical Study of the Self-loosening of a Bolted Assemblyalysis of the numerical results and of the experiments, especially the interface surfaces will give us a clue in order to validate the sliding phenomena, which is according to Zadoks, the movement implying the self-loosening of the assembly.
荨麻
发表于 2025-3-26 02:03:21
http://reply.papertrans.cn/16/1504/150308/150308_26.png
Incisor
发表于 2025-3-26 08:11:04
http://reply.papertrans.cn/16/1504/150308/150308_27.png
朴素
发表于 2025-3-26 10:26:34
Multifunctional Device for Bicycles Cyclelogistics (2013), a European project; a report “Food in Spain” by the Ministry of Agriculture, Food and Environment (2017), and the annual bicycle barometer developed by the DGT (Dirección General de Tráfico, 2017) where the opinion, habits and use that the Spanish people make of the bicycle a
Antimicrobial
发表于 2025-3-26 15:34:46
Identification of the Main Contributors in the 3D Tolerances Assessment in Mechanical Transmissionsnd geometrical tolerances. Focusing on a gearbox assembly, the CAT-based approach aims to identify the main contributors (sources) of variation within the tolerance stacks, by means of a statistical and sensitivity analysis. After defining the design inputs (involved parts, tolerances definition, as
公司
发表于 2025-3-26 20:36:47
http://reply.papertrans.cn/16/1504/150308/150308_30.png