dialect
发表于 2025-3-27 00:55:28
Numerical Modeling of the Dispersion of Ceramic Nanoparticles during Ultrasonic Processing of A356-ba ultrasonic cavitation system, available in the Solidification Laboratory at The University of Alabama. The required ultrasonic parameters to achieve cavitation for adequate degassing and refining of the A356 alloy as well as the fluid flow and solidification characteristics for uniform dispersion
去世
发表于 2025-3-27 01:41:37
http://reply.papertrans.cn/16/1503/150257/150257_32.png
Amenable
发表于 2025-3-27 08:54:02
http://reply.papertrans.cn/16/1503/150257/150257_33.png
Subdue
发表于 2025-3-27 10:48:42
Scaling Analysis of Alloy Solidification and Fluid Flow in a Rectangular Cavity momentum were scaled in order to determine the dependence of various aspects of solidification on the process parameters for a uniform initial temperature and an isothermal boundary condition. This work improved on previous analyses by adding considerations for the cooling bulk fluid flow. The anal
灌溉
发表于 2025-3-27 16:04:50
http://reply.papertrans.cn/16/1503/150257/150257_35.png
BOAST
发表于 2025-3-27 18:26:50
The Fluid Flow and Solidification Phenomenon in Billet Continuous Casting Process with Mold and Finantinuous casting with mold (M-EMS) and final electromagnetic stirrings (F-EMS). The columnar region was regarded as a porous media and a generalized approach was used to calculate permeability, while for the equiaxed zone, a variable apparent viscosity model was applied to simulate the fluid flow at
Feedback
发表于 2025-3-28 01:04:22
Columnar-to-Equiaxed Transition in zn-27wt.%al Alloys: A Comparation Between Vertical and Horizontald horizontal arrangement of experimental device. The main parameters analyzed include cooling rate of the melt, position of the solidification fronts for solidus and liquidus temperatures, velocity of solidification fronts and temperature gradients. In both type of solidifications the CET does not o
歪曲道理
发表于 2025-3-28 02:17:24
Microstructure Investigation of Aluminum Die-Cast Parts with Different Gating Conditions Tested in Fd fatigue life and a change in the failure location of the evaluated parts compared with the baseline parts, which prompted submission of both sets of samples for metallurgical evaluation. Optical microscopy, scanning electron microscopy and non-destructive X-Ray imaging tools were employed to chara
五行打油诗
发表于 2025-3-28 08:31:05
A Coupled Thermo-Mechanical Simulation on Squeeze Casting Solidification Process of Three-Dimensionag ANSYS Parametric Design Language (APDL). The effect of volume shrinkage due to cooling and solidification, the effect of pressure on the latent heat release, the mutual dependence of interfacial heat transfer and casting deformation, and materials behavior under elevated temperatures were taken in
Trabeculoplasty
发表于 2025-3-28 13:18:05
http://reply.papertrans.cn/16/1503/150257/150257_40.png