Adenocarcinoma
发表于 2025-3-25 04:08:19
Lecture Notes in Mechanical Engineeringhttp://image.papertrans.cn/a/image/150151.jpg
抛媚眼
发表于 2025-3-25 08:05:45
http://reply.papertrans.cn/16/1502/150151/150151_22.png
新义
发表于 2025-3-25 13:23:40
http://reply.papertrans.cn/16/1502/150151/150151_23.png
CUB
发表于 2025-3-25 16:53:28
Multi-criteria Optimization of the Abrasive Waterjet Cutting Process for the High-Strength and Wear-tested. In order to determine the most beneficial control parameters of the cutting process, multi-criteria optimization by means of the Gray Relation Analysis (GRA) combined with the Taguchi approach was carried out.
流动才波动
发表于 2025-3-25 23:06:14
Creating a Database for Turned Surfacese quality. Various materials were used for the database which should serve to optimize the abrasive water jet turning processes in order to increase the technological efficiency and contribute to its automation.
FOVEA
发表于 2025-3-26 03:39:48
http://reply.papertrans.cn/16/1502/150151/150151_26.png
去掉
发表于 2025-3-26 08:08:03
Effect of the Ultrasonically Enhanced Water Jet on Copper Surface Topography at a Low Traverse Speederimental investigation, it was found that a low traverse speed rate has destructive effects on the material with significant weight and volume loss of the material. Surface topography was characterized by a formation of protrusions, depressions and craters. Subsurface material failure of up to 200 µm was detected.
一条卷发
发表于 2025-3-26 11:16:01
Some Investigations into 1,000 MPa Pure Waterjet Cuttingesearch into the influence of selected pressure levels on the quality of the cutting edge of processed carbon fiber composite, and into the wear on the water nozzle subjected to ultra-high pressure (UHP) is presented.
Ambiguous
发表于 2025-3-26 13:11:25
http://reply.papertrans.cn/16/1502/150151/150151_29.png
preservative
发表于 2025-3-26 20:42:23
Global Constraints and Filtering Algorithms,g a digital microscope and further analyzed. Furthermore, the article deals with the measurement of the surface roughness according to the ISO 4287 standard in relation to the amount of ventilation air. Roughness values were obtained using an optical profilometer.