逢迎白雪
发表于 2025-3-23 11:02:14
http://reply.papertrans.cn/15/1499/149801/149801_11.png
无价值
发表于 2025-3-23 14:52:31
http://reply.papertrans.cn/15/1499/149801/149801_12.png
Ballad
发表于 2025-3-23 18:29:53
https://doi.org/10.1007/978-1-349-09170-6ermal expansion coefficient between Ag thin film and pc-Si surface is responsible for the formation of these Ag NPs. The magnitude of RTP temperature and amount of RTP heat treatment helps in reshaping of Ag NPs, and accordingly, surface coverage by Ag NPs changes onto the pc-Si surface. Experimenta
Admonish
发表于 2025-3-23 22:51:46
http://reply.papertrans.cn/15/1499/149801/149801_14.png
aggressor
发表于 2025-3-24 02:24:51
An Introduction to Systems Analysis,e of the solar cell. In this work, constant factor ‘.’ value of 51.43 mA-cm.K. is obtained for the calculation of reverse saturation current density in the temperature range from 273 to 373 K, and accordingly, solar cell output parameters are calculated.
衰弱的心
发表于 2025-3-24 10:14:01
Monte Carlo Pure-model Calculations, thermal comfort to the wearer head for 2 h. The heat inside the helmet is absorbed by the PCM pouch, through the process of conduction. The stored heat in the pouch had to be discharged for its reuse. The PCM helmet cooling system is simple and had the potential to be implemented as a practical sol
Vital-Signs
发表于 2025-3-24 11:40:43
http://reply.papertrans.cn/15/1499/149801/149801_17.png
坦白
发表于 2025-3-24 17:24:20
http://reply.papertrans.cn/15/1499/149801/149801_18.png
委屈
发表于 2025-3-24 19:03:54
http://reply.papertrans.cn/15/1499/149801/149801_19.png
引起
发表于 2025-3-24 23:53:59
Computer Supported Collaborative Learning which leads to approximately 10% increment in the relative efficiency of the solar cell. Finally, a thermoelectric generator (TEG) is inserted between the solar cell and heat sink. The TEG adds an extra power of 1.2 mW to the total output of the system.