Tremor
发表于 2025-3-28 16:37:47
Implementation of a 3D Virtual Drummeral and hexahedral for 3-D analysis and triangular elements for 2-D analysis) and perform FEM analyses. The proposed framework for automated CAD integrated FEM application is demonstrated using four case studies using the part 21 file extracted from STEP AP209 files of 3-D CAD models. The obtained re
慢跑
发表于 2025-3-28 20:29:09
https://doi.org/10.1007/978-3-7091-6240-8APE using the dynamic analytical models derived for the same. Track profile and its impact on the bicycle are considered as base excitation, which is adopted from a myriad of experiments. The impact of the response of the suspensions on the human comfort level is evaluated as per ISO 2631. The compa
SEMI
发表于 2025-3-29 01:31:08
http://reply.papertrans.cn/15/1497/149699/149699_43.png
Celiac-Plexus
发表于 2025-3-29 04:53:53
Computer Animation and Simulation 2001ifferent material compositions and wire mesh sizes to achieve higher bending stiffness and damping ratio. Further, the influence of wire diameter and the number of layers of wire mesh on stiffness and damping properties were investigated.
NOVA
发表于 2025-3-29 07:51:10
http://reply.papertrans.cn/15/1497/149699/149699_45.png
Lasting
发表于 2025-3-29 13:09:17
Implementation of a 3D Virtual Drummer 10 wt%) were modelled using CAD modelling software. Compressive strength analysis was carried out using finite element analysis software (ANSYS R15.0) to determine the mechanical properties of the matrix and composite models such as von Mises stress, equivalent elastic strain, and total deformation
Costume
发表于 2025-3-29 16:19:03
http://reply.papertrans.cn/15/1497/149699/149699_47.png
stressors
发表于 2025-3-29 22:10:26
Computer Animation and Simulation ’95ters is accomplished such that desired bend angle can be achieved with a high production rate, minimum energy consumption, small heat-affected zone, small residual stress, high hardness, and the minimum bend radius.
必死
发表于 2025-3-30 03:32:20
http://reply.papertrans.cn/15/1497/149699/149699_49.png
Galactogogue
发表于 2025-3-30 07:29:09
STEP AP209 File-Based Automated FE Analysis and Simulation Based on Data Stored in 3-D CAD Modelsal and hexahedral for 3-D analysis and triangular elements for 2-D analysis) and perform FEM analyses. The proposed framework for automated CAD integrated FEM application is demonstrated using four case studies using the part 21 file extracted from STEP AP209 files of 3-D CAD models. The obtained re