paleolithic
发表于 2025-3-30 10:23:56
Composite Material Structure and Processing,t are mechanical recycling, thermal recycling and chemical recycling, which is also called feedstock recycling. From all three techniques, chemical recycling is the only one which can produce new materials that correspond to the quality of conventional virgin material. However, the technique is limi
dissolution
发表于 2025-3-30 16:09:45
Composite Material Structure and Processing, throughput is particularly important for extruders with a grooved feed section. In contrast to smooth barrel extruders the throughput of the entire plant is determined at the feed section. Various simplifications are necessary for an analytical modelling of the solids conveying, e.g. the classifica
prosperity
发表于 2025-3-30 17:25:46
Science of composite materials,r compounds. The phase transition of the water during heating of the rubber in the vulcanisation unit is used to initiate the blowing reaction. In order to achieve the required quality parameters (e.g. mechanics and cell structure), the cross-linking and blowing reaction have to be balanced. This ca
正面
发表于 2025-3-31 00:35:02
Science of composite materials,ction. Material efficiency of thermoformed packaging products, especially cups, can be increased by using pre-stretching plugs. These plugs affect the wall thickness distribution of the product. Thin areas, which can cause problems concerning top-load stability, can be avoided. By adjusting the shap
FLASK
发表于 2025-3-31 01:17:44
Materials Research and Engineering from double-flighted screws and leading to barrier screws with dispersive and distributive mixing elements. We present different high-performance screw concepts for various applications in the injection molding industry. Besides a comparative view of different screw designs, we focus on modelling t
ALIEN
发表于 2025-3-31 08:40:22
http://reply.papertrans.cn/15/1495/149413/149413_56.png
AGATE
发表于 2025-3-31 09:56:20
http://reply.papertrans.cn/15/1495/149413/149413_57.png
Fester
发表于 2025-3-31 15:15:29
Materials Research and Engineeringecessary to produce parts with high quality. Changes in granule-batches, environmental influences and wear of the machine and the mould can strongly affect the quality of the produced parts. For this reason an injection moulding machine needs an experienced operator, who reacts properly to changing
Compassionate
发表于 2025-3-31 19:53:21
http://reply.papertrans.cn/15/1495/149413/149413_59.png
Distribution
发表于 2025-3-31 21:43:12
Carbon Fiber/Carbon Matrix Composites long fiber reinforcements. By aligning the continuous fibers in the main load paths, the reinforcement can be optimally exploited. The 3D skeleton winding process (3DSW) is a robot-based filament winding technique in which defined load application points are connected with wound closed loop structu