FLIP
发表于 2025-3-23 09:52:05
http://reply.papertrans.cn/15/1495/149412/149412_11.png
Working-Memory
发表于 2025-3-23 17:28:35
http://reply.papertrans.cn/15/1495/149412/149412_12.png
壮丽的去
发表于 2025-3-23 19:53:22
Composite Asymptotic Expansionsnly certain factor that can be directly related to the bulk viscoelastic properties of the polymer. The mechanism of adhesion is then discussed in terms of electric surface charges and van der Waals forces and it is suggested that a simple monistic view is not valid. The adhesion component of fricti
机警
发表于 2025-3-24 00:46:49
http://reply.papertrans.cn/15/1495/149412/149412_14.png
essential-fats
发表于 2025-3-24 04:58:12
http://reply.papertrans.cn/15/1495/149412/149412_15.png
品牌
发表于 2025-3-24 08:48:59
Machining of polymer-composite materials,ar chain and allowed to adsorb at 0.13 μPa pressure and ambient temperature on a freshly prepared iron film produced by an evaporation process in situ from an iron wire wrapped around a tungsten filament. The events inside the vacuum chamber were followed with an MS 10 mass spectrometer and (where a
obligation
发表于 2025-3-24 12:59:53
,Composite Theory — Conductivity,ased on fracture mechanics which has been successfully used to interpret other failure processes in rubbers. The theory treats the removal of the rubber when a steady state has been reached in the development of the abrasion pattern in the rubber surface. It is suggested that crack growth occurs int
lymphedema
发表于 2025-3-24 16:25:34
https://doi.org/10.1007/978-3-662-49514-8he physical science in high school we addressed the problem of friction — measuring the force required to move a slider over a flat surface. We were taught that the ratio of the force required to keep the slider in uniform motion to the force holding the slider to the surface was a constant called t
Tempor
发表于 2025-3-24 22:58:07
https://doi.org/10.1007/978-0-85729-166-0(s). The ratio F/N of frictional force to normal load commonly decreases for polymers when N increases because F is proportional to N. and m+n < 1; m and n. are defined by the expressions w = k1N. and d = k.N.; w and d are the width and the depth of the disturbed material; k. and k. are proportional
opportune
发表于 2025-3-25 02:04:59
http://reply.papertrans.cn/15/1495/149412/149412_20.png