AROMA
发表于 2025-3-26 22:29:18
http://reply.papertrans.cn/15/1490/148968/148968_31.png
性行为放纵者
发表于 2025-3-27 03:37:22
To Study the Effect of Electromagnetic Forces on WIRE Electrochemical Discharge Machining,standing of the removal of material and radial overcut of fabricated WECDM setup for machining of SiC-based PMC. The effect of input parameters (duty cycle, electrolyte concentration, wire feed) was analyzed on the SiC PMC. A comprehensive experimental study was designed and conducted using Taguchi’s L9 orthogonal array.
时间等
发表于 2025-3-27 08:23:02
Reliability Prediction and Its Simulation for a Friction Stir Processing Tool,be wear of the tool after every pass over the workpiece was recorded for constant feed, speed, and depth of cut till the failure of the tool. Differential equations are generated based on Markov model for various failure stages and solved using Runge–Kutta method on MATLAB. This result is verified by Monte-Carlo simulation technique.
Wernickes-area
发表于 2025-3-27 12:44:04
2195-4356 s across the globe.Discusses applications of soft computing,This book presents select proceedings of the 2nd International Conference on Industrial and Manufacturing Systems (CIMS 2021) and discusses the applications of soft computing, modelling and optimization practices in industrial and manufactu
etiquette
发表于 2025-3-27 14:40:03
James C. Hayton,Saloua Sehili,Vida Scarpelloda model has been utilised to simulate the viscous behaviour of blood. For this study, the outlet of the T-micromixer has two twists and a characteristic dimension of 133.33 µm. The mixing characteristics have been observed for flow rates ranging from 0.0029 to 0.015 kg/h.
步兵
发表于 2025-3-27 18:03:44
Joseph J. Cordes,Harry S. Watsonperheated molten alloy directly into a semi-finished product. Atomization casting converts a molten stream into a spray of droplets by high pressure gas atomization. The grain refinement is occurred in Al-6%Si and Al-12%Si atomization cast alloys.
outrage
发表于 2025-3-27 23:44:46
Eliezer Geisler,Albert H. Rubensteincent years, generative approaches have become increasingly popular in a variety of technological domains. The present research focuses on design and analysis of UAV frame structure using generative design methodology. The work presented discusses the overall procedural steps for design and analysis using Fusion 360.
COLON
发表于 2025-3-28 04:03:14
Numerical Investigation of T-Micromixer with Twisted Outlet Channel for Non-newtonian Fluid,da model has been utilised to simulate the viscous behaviour of blood. For this study, the outlet of the T-micromixer has two twists and a characteristic dimension of 133.33 µm. The mixing characteristics have been observed for flow rates ranging from 0.0029 to 0.015 kg/h.
小虫
发表于 2025-3-28 09:51:43
http://reply.papertrans.cn/15/1490/148968/148968_39.png
争议的苹果
发表于 2025-3-28 12:52:59
http://reply.papertrans.cn/15/1490/148968/148968_40.png