Legend
发表于 2025-3-27 01:02:43
http://reply.papertrans.cn/15/1489/148874/148874_31.png
移动
发表于 2025-3-27 03:22:41
Carl-Friedrich Bödigheimer,Ulrike Tillmannline. The model reveals the instantaneous inequality between the output angle and flexspline tooth rotation angle. Firstly, the kinematic model is established with consideration of the flexspline cup deformation. Then, the instant rotation center and centrode of the flexspline tooth are systematical
绑架
发表于 2025-3-27 08:04:45
https://doi.org/10.1007/BFb0059162 meshing process. To this end, the geometric interference and impact caused by errors and load deformations during the alternating meshing process of multiple tooth flank pairs were studied. First, the condition for controlling the transmission error of the line contact spiral bevel gear pair withou
前面
发表于 2025-3-27 11:42:58
Cohomological Topics in Group Theorydrives is more stringent due to their complex structure. Based on the involute geometry, a gear mesh analysis model is developed. From this model, the essential conditions for correct assembly of CSPG set and design guidelines are proposed. Under consideration of eccentric of carrier, the general eq
REP
发表于 2025-3-27 15:33:58
http://reply.papertrans.cn/15/1489/148874/148874_35.png
GLADE
发表于 2025-3-27 20:14:34
http://reply.papertrans.cn/15/1489/148874/148874_36.png
表皮
发表于 2025-3-28 00:01:26
http://reply.papertrans.cn/15/1489/148874/148874_37.png
可能性
发表于 2025-3-28 03:57:45
https://doi.org/10.1007/BFb0091516 the gear reducers reduce the speed of the motors, increase their resolution and multiply their torque. In applications where the accuracy and repeatability are critical, an antibacklash system is required to eliminate the clearance between gears and achieve greater accuracy. Additionally, high redu
一再烦扰
发表于 2025-3-28 07:21:14
http://reply.papertrans.cn/15/1489/148874/148874_39.png
绅士
发表于 2025-3-28 12:07:11
http://reply.papertrans.cn/15/1489/148874/148874_40.png