认识
发表于 2025-3-23 10:02:09
http://reply.papertrans.cn/15/1489/148868/148868_11.png
Foment
发表于 2025-3-23 15:30:47
https://doi.org/10.1007/978-981-19-4823-7. In this chapter, first, the strength of PAN-based CFRP laminates conforms to the time–temperature superposition principle (TTSP) for matrix resin viscoelasticity irrespective of the structural configuration and loading style. These facts were confirmed by experimentation. Therefore, the applicabil
只有
发表于 2025-3-23 19:20:28
https://doi.org/10.1007/978-3-662-03144-5 and physical aging) of polymers and their composites. The basic concept of time-influence factors superposition principle was explained, and the examples were shown in the following section. Consequently, the effect of influence factors can be considered by time and modulus shift factors which are
defuse
发表于 2025-3-24 01:26:20
https://doi.org/10.1007/978-3-662-05273-0 embedded in viscoelastic matrix. In comparison with the traditional method of asymptotic homogenization, our approach allows treating temperature as a parameter and studying the response of mechanical characteristics to the change in temperature. We use Maxwell’s model of viscoelasticity and start
手榴弹
发表于 2025-3-24 02:21:44
http://reply.papertrans.cn/15/1489/148868/148868_15.png
小臼
发表于 2025-3-24 06:45:59
http://reply.papertrans.cn/15/1489/148868/148868_16.png
grenade
发表于 2025-3-24 14:11:28
https://doi.org/10.1007/978-3-642-51185-1nding to a wide range of fields, the understanding of complex phenomena such as impact, contact, and fracture in these viscoelastic materials is a very interesting problem from both engineering and industrial viewpoints.
不整齐
发表于 2025-3-24 18:36:28
https://doi.org/10.1007/978-3-031-22401-0Viscoelasticity; Time-dependent Materials; Creep; Relaxation; Modelling; Mechanics
Tdd526
发表于 2025-3-24 22:49:52
http://reply.papertrans.cn/15/1489/148868/148868_19.png
合唱队
发表于 2025-3-24 23:14:11
Book 2023near and nonlinear mechanical behavior of viscoelastic materials and their composites, taking into consideration large deformations, low, moderate and large strain rates, as well as failure and fracture phenomena. The contributions are inspired by advanced applications in modern technologies, such as injection molding and extrusion. .