BLOT
发表于 2025-3-23 11:50:00
http://reply.papertrans.cn/15/1489/148852/148852_11.png
RALES
发表于 2025-3-23 17:50:18
http://reply.papertrans.cn/15/1489/148852/148852_12.png
秘传
发表于 2025-3-23 19:43:26
http://reply.papertrans.cn/15/1489/148852/148852_13.png
独特性
发表于 2025-3-23 22:39:45
http://reply.papertrans.cn/15/1489/148852/148852_14.png
一加就喷出
发表于 2025-3-24 02:39:46
Conclusions and Future Research Directions,odel performed by the hydrodynamic software Ansys-Fluent. We are interested in the heterogeneous assembly of Al alloy and Mg alloy by laser beam welding. Aluminum and Magnesium plates are joined in butt configuration. The objective of this work is to simulate the temperature field, velocity field, f
善辩
发表于 2025-3-24 08:48:49
https://doi.org/10.1007/978-3-319-30330-7this approach, the initial machining plan considers all possible roughing passes and a finishing pass. At the end of the computation process, the existence of a roughing pass in the final program of the operation is evaluated using a combinatorial variable associated to this pass. On the other hand,
牌带来
发表于 2025-3-24 13:53:24
http://reply.papertrans.cn/15/1489/148852/148852_17.png
ungainly
发表于 2025-3-24 18:02:11
http://reply.papertrans.cn/15/1489/148852/148852_18.png
过于平凡
发表于 2025-3-24 20:17:34
Yi Yi Huang,Cun Lu Xu,Yan Qiu Cheny and soluble oil), by using the technique of single cycle scratch testing. A CSM scratch testing machine equipped with a 50 µm radius Rockwell indenter was used for the experiments. The scratch length was set to 5 mm and different scratching loads (5 N, 10 N and 15 N) and speeds (10 mm/min, 50 mm/m
琐碎
发表于 2025-3-25 00:35:27
http://reply.papertrans.cn/15/1489/148852/148852_20.png