受辱
发表于 2025-3-28 17:54:46
Bodhisatwa Sadhu,Ramesh Harjaniluence of gyroscopic effect and rotary inertia of the shaft. The bearings are replaced by linear springs. The partial differential equation (PDE) governing the beam vibrations is reduced to a set of ordinary differential equations (ODE) by modal analysis. A detailed parametric study is conducted and
孵卵器
发表于 2025-3-28 19:25:41
http://reply.papertrans.cn/15/1489/148848/148848_42.png
定点
发表于 2025-3-29 00:20:50
Tomaž Šolc,Carolina Fortuna,Mihael Mohorčičof 4.84. The convergent-divergent (CD) nozzles with Mach numbers considered were from 1.25 to 3, and experiments were done for correctly, imperfectly, and under-expanded cases. For low Mach numbers, namely M = 1.25 and 1.3, variation in the duct’s flow is identical, and control is not applicable. Ho
转向
发表于 2025-3-29 06:32:13
Miguel López-Benítez,Fernando CasadevallThis paper describes an efficient model of optimizing cutting parameters in machining of heat-treated Beryllium Copper Alloy to minimize surface roughness (Ra), cutting forces (Fc) and maximize Metal Removal Rate (MRR). The input parameters are speed, feed, depth of cut, nose radius and heat treatme
Chronic
发表于 2025-3-29 09:47:53
http://reply.papertrans.cn/15/1489/148848/148848_45.png
REIGN
发表于 2025-3-29 14:54:57
Mustafa Cenk Ertürk,Hüseyin Arslanisions of consumers as well as product assessments. It is broadly recognized that higher user satiation and better product performance can be reached through product aesthetic design. Integrating emotional value into tangible products has become an important approach for increasing a product’s emula
格子架
发表于 2025-3-29 16:46:09
http://reply.papertrans.cn/15/1489/148848/148848_47.png
易于出错
发表于 2025-3-29 20:17:04
http://reply.papertrans.cn/15/1489/148848/148848_48.png
Atrium
发表于 2025-3-30 03:33:52
http://reply.papertrans.cn/15/1489/148848/148848_49.png
洞穴
发表于 2025-3-30 04:21:41
Hüseyin Arslan,Mustafa E. SŞhin sensing mechanism to detect metallic objects and capacitive sensors to discriminate between wet and dry waste. Currently there is no proper access to waste disposal services which in turn affects appropriate waste management. Majority of the waste collected are either dumped unscientifically or dis