myriad
发表于 2025-3-25 04:52:01
http://reply.papertrans.cn/15/1489/148841/148841_21.png
暂时中止
发表于 2025-3-25 09:48:00
The Evolution of the Hybrid MindComparative analysis of configurations of test centrifuges designed for mechanical testing of devices and instruments has been performed. Schemes of centrifuges, rotor-balancing devices, have been considered. Recommendations for rotor aerodynamic casings design have been given.
王得到
发表于 2025-3-25 12:30:20
https://doi.org/10.1007/978-3-319-17272-9sed on the idea of iterative local replacement of some objects placed in a container. Six selection rules for deleting placed objects and subsequent redistribution of them with the aim to obtain a packing with a better density are proposed. The effectiveness of the packing compaction algorithm has b
Inclement
发表于 2025-3-25 17:19:37
Yuri Quintana Ph.D.,Jennifer McWhirter Ph.D.ments of buildings, hydro-technical constructions, bridges, oil rigs, different pipes, etc. The statement of the problem is considered the rigorous statement. In the infinite systems, Floquet solution is founded. The comparison of the wave processes in the rod and beam is fulfilled. The energy fluxe
ETHER
发表于 2025-3-25 21:26:04
https://doi.org/10.1007/978-3-319-51732-2raphy and the method of acoustic emission. Dangerous defects in the refinery column were detected before running began as a result of the joint application of these methods. This example demonstrates the effectiveness of using such the properties of acoustic emission method, as the integral nature o
Corporeal
发表于 2025-3-26 03:31:39
http://reply.papertrans.cn/15/1489/148841/148841_26.png
exquisite
发表于 2025-3-26 07:31:10
Yuri Quintana Ph.D.,Jennifer McWhirter Ph.D.hift operation. A discrepancy of predicted parameters of predicted vibration activity of the milling system compared to the actual numbers during lowering of the spindle module operating frequencies range in the area of steady cutting. Based on the analysis of the obtained data and additional studie
ALT
发表于 2025-3-26 09:08:55
http://reply.papertrans.cn/15/1489/148841/148841_28.png
无思维能力
发表于 2025-3-26 12:55:21
Jessica S. Ancker M.P.H., Ph.D.ipulator to realize the predetermined path of an end effector. The set of points characterizing subsequent positions of the actuators is determined by solving an optimization task on the manipulator’s configuration. The laws for motion of slave cylinders are established by the method of the fifth-or
同位素
发表于 2025-3-26 17:00:26
Vimla L. Patel,David R. Kaufman,Trevor Cohen synthesis concept based on the determination of an optimized meshing line to address this issue. The synthesis algorithm including its key and the largest (as concerns calculations) blocks is described in the article. The article introduces derivation of formulae for determination of the tooth prof