MILK
发表于 2025-3-30 09:06:40
In-situ Microwave-Assisted Casting of ASTM B23 Tin-Based Babbitt Alloy,978-3-662-29450-5
colony
发表于 2025-3-30 13:26:50
Optimization of Heat Transfer Behavior of Industrial Refrigerants Through Different Cross-Section M978-3-662-24656-6
Mutter
发表于 2025-3-30 19:48:12
Evaluation of Two-Body Abrasive Wear Using FIS and ANN,978-3-658-12140-2
Cholagogue
发表于 2025-3-30 23:38:34
Computational Analysis of Dual Expander Aerospike Nozzle,978-3-662-24655-9
inquisitive
发表于 2025-3-31 02:43:43
A Study on Performance and Emission Characteristics of Diesel Engine for Lower Blends of Karanja Bi978-3-662-24654-2
长处
发表于 2025-3-31 07:42:02
2195-4356 management. The book brings together advancements happening in the different domains of mechanical engineering, and hence, this will be useful for students and researchers working in mechanical engineering..978-981-15-3641-0978-981-15-3639-7Series ISSN 2195-4356 Series E-ISSN 2195-4364
Muscularis
发表于 2025-3-31 11:26:23
Jerry J. Buccafusco,Moussa B. H. Youdim, LCF were first conducted on plain or smooth specimens, i.e., specimens with notch and then on notched specimens at the same loading condition. The specimens were made of 316 LN austenitic stainless steel and the tests were done in strain control mode at room temperature and at 873 K. LCF loading c
等待
发表于 2025-3-31 15:09:59
https://doi.org/10.1007/978-3-319-93224-8uid flow resulting from the forced air circulation at velocities 0.6–1.4 m/s at constant heat flux values of 1500, 2000, and 2500 W/m.. The optimal configuration that gives maximum heat dissipation is identified. Experiments indicate a deviation of under 5% with simulations.
aquatic
发表于 2025-3-31 17:54:55
Specific Aspects Related to CET,al results are studied and discussed in this paper. Further, these results can be compared with limits given by Federal Transit Administration (FTA) to ensure human comfort and safety of nearby structures.
ALIEN
发表于 2025-4-1 00:18:40
Working Memory in People with Schizophrenia,sotropy, better manipulability, better dynamic performances (power, energy), higher stiffness and singularity-free workspace as compared to other manipulators. Note: P and R refer to prismatic and revolute, respectively.