Exonerate
发表于 2025-3-23 11:37:36
http://reply.papertrans.cn/15/1489/148833/148833_11.png
ITCH
发表于 2025-3-23 16:43:03
https://doi.org/10.1007/978-3-031-48891-7ntact analysis of the joint thread was carried out by using ANSYS Workbench finite software. According to the working characteristics of directional drilling, the structure of non-magnetic drill rod joint was optimized, which has reduced the stress of joint by 20.8%, the contact stress decreased by
缓和
发表于 2025-3-23 18:36:50
http://reply.papertrans.cn/15/1489/148833/148833_13.png
SOBER
发表于 2025-3-24 01:04:24
http://reply.papertrans.cn/15/1489/148833/148833_14.png
反话
发表于 2025-3-24 06:11:24
https://doi.org/10.1007/978-3-031-48891-7ulation model considering the error of gear and thread was established. This paper analyzed the thread pair error firstly, including assembly errors, eccentricity errors and errors caused by load. Secondly, the errors of gear pair including profile deviation, helix deviation and pitch deviation were
改变立场
发表于 2025-3-24 09:13:06
http://reply.papertrans.cn/15/1489/148833/148833_16.png
Biofeedback
发表于 2025-3-24 13:55:32
Ankit Garg,Priya Mishra,Naveen Mishrahine tool component motion, load transfer chain and error transmission chain, the machining error under the control of machining process, and the directional rigidity chain on the machine tool layout scheme and The influence law of structural design was studied. The fundamental techniques of compone
Mitigate
发表于 2025-3-24 15:14:51
http://reply.papertrans.cn/15/1489/148833/148833_18.png
armistice
发表于 2025-3-24 20:24:19
http://reply.papertrans.cn/15/1489/148833/148833_19.png
sparse
发表于 2025-3-25 02:42:29
http://reply.papertrans.cn/15/1489/148833/148833_20.png