tolerance
发表于 2025-3-30 09:54:21
https://doi.org/10.1007/b107158the boom which is modelled as an Euler–Bernoulli boom as well as the tie bars’ effects are considered in the model. The Lagaragian method and the assumed mode method are combined to formulate the rigid-flexible coupling model which could fully describe its different motions. The nonlinear coupled mo
outer-ear
发表于 2025-3-30 15:07:31
Overview of Cognitive Behavioral Therapythe structural parameters on the operating frequency, output voltage and output power of the piezoelectric cantilever beam. Firstly, the influence of the length, the thickness and the width ratio of the substrate and the piezoelectric ceramic on the output voltage and natural frequency of the piezoe
光明正大
发表于 2025-3-30 19:23:29
Elizabeth R. Halliday,Jill Ehrenreich-Mayd in actual working condition of the temperature must be considered to ensure the accuracy and performance of product in the design stage. In this paper, considering the tolerance principle, based the SDT theory and initial tolerance design scheme of assembly, the mathematical tolerance model is est
GRIN
发表于 2025-3-30 22:09:33
Brian Allen,Elizabeth Riden,Chad E. Shenkcity, assembly error and bending deformation of shaft on gear mesh parameters such as pressure angle, backlash and time-varying mesh stiffness were determined. Then, the gear mesh dynamic model was formulated by replacing the constant backlash and time-varying mesh stiffness under quasi-static condi
门闩
发表于 2025-3-31 01:01:32
http://reply.papertrans.cn/15/1489/148831/148831_55.png
无表情
发表于 2025-3-31 06:42:45
http://reply.papertrans.cn/15/1489/148831/148831_56.png
宽度
发表于 2025-3-31 12:22:05
https://doi.org/10.1057/978-1-137-47854-2its power and movement according to pairs of conjugated curves on the tooth profiles. According to conjugated curves, the driving and driven tooth profiles of the new meshing principle gears are constructed to apply to different usage occasion. The progress of space curve meshing theory is introduce
glacial
发表于 2025-3-31 16:46:47
Mindfulness and Third Wave Therapies,and prediction of the fatigue life of flexible bearings. When a flexible bearing is assembled in a wave generator, pre-deformation occurs. In such a situation, rigid ring theory is not applicable. In this study, a multi-body contact model of a flexible bearing was developed with ANSYS and used to st
和谐
发表于 2025-3-31 18:58:35
http://reply.papertrans.cn/15/1489/148831/148831_59.png
诱骗
发表于 2025-3-31 22:11:27
Jana Vlčková-Mejvaldová,Petr Horákction applicator roll heats the roller and achieves expected effect, so as to improve the quality of printing and coating. In this paper, based on 3-D electromagnetic analysis software Ansoft Maxwell, a 3-D model of electromagnetic induction applicator roll is established. Current, frequency, materi