苦笑
发表于 2025-3-28 17:50:17
http://reply.papertrans.cn/15/1488/148779/148779_41.png
FAZE
发表于 2025-3-28 21:36:56
http://reply.papertrans.cn/15/1488/148779/148779_42.png
不溶解
发表于 2025-3-29 00:03:31
Experimental Investigations on Biodegradable Polymer Fabricated Using Extrusion-Based Additive Manu
CLAP
发表于 2025-3-29 03:30:53
http://reply.papertrans.cn/15/1488/148779/148779_44.png
聪明
发表于 2025-3-29 09:28:03
http://reply.papertrans.cn/15/1488/148779/148779_45.png
Ejaculate
发表于 2025-3-29 11:37:56
http://reply.papertrans.cn/15/1488/148779/148779_46.png
DEMUR
发表于 2025-3-29 15:46:33
http://reply.papertrans.cn/15/1488/148779/148779_47.png
amphibian
发表于 2025-3-29 22:36:47
http://reply.papertrans.cn/15/1488/148779/148779_48.png
BOOST
发表于 2025-3-30 01:55:28
https://doi.org/10.1007/978-3-658-16346-4ng exponent of Inconel 718 was lower. The Inconel 718 and brazed carbide tool combination was ranked best, followed by D2 cold work steel and medium carbon steel. The result was validated by chip macrographs and SEM observation of chip surfaces.
GNAT
发表于 2025-3-30 05:41:50
https://doi.org/10.1057/9780230610170al results demonstrated a moderate fit, with a coefficient of determination of 0.7482 for radial overcut, 0.7204 for delamination factor, and 0.8423 for hole taper. These findings have practical implications for optimizing the mechanical micro-drilling process for CFRP-Ti6Al4V stack composite, resul