津贴
发表于 2025-3-26 22:02:25
Globalization and Co-operative Strategies, respectively. An oblique impact load showed the CFRP composite panel resists more load in comparison to the normal impact load. The normal and oblique impact results are showed that the non-linear behavior of the residual velocity.
冷漠
发表于 2025-3-27 02:20:08
Distributed Artificial Intelligence,ion models. Further, the ANN model is validated on the basis of two other unseen sets of experimental data on mild steel. From the validation, it has been found that prediction of surface roughness by the ANN has higher accuracy as compared to other existing methods.
genuine
发表于 2025-3-27 08:50:01
Co-ordination in Artificial Agent Societies. A new device for easing the process specifically for removing eyes was developed and evaluation of the device was conducted and compared with the present tool, i.e., knife. Evaluation parameters considered were the time required and the amount of material removed during the eye-removing task. The
Myosin
发表于 2025-3-27 09:48:17
Co-ordination in Artificial Agent Societies of total volume of concrete. The optimum content of polyester fibre for geopolymer concrete reinforced with hybrid fibre was decided, based on workability. The durability criteria are also studied for the samples. Percentage loss in mass and compressive strength was evaluated at regular interval of
Carminative
发表于 2025-3-27 15:03:19
http://reply.papertrans.cn/15/1488/148750/148750_35.png
Respond
发表于 2025-3-27 19:31:20
Conference proceedings 202321 held at Delhi Technological University. It covers recent trends in various fields of mechanical engineering. The broad range of topics and issues covered include mechanical system engineering, materials engineering, micro-machining, renewable energy, industrial engineering and additive manufactur
dura-mater
发表于 2025-3-27 21:57:36
2195-4356 APIE) – 2021 held at Delhi Technological University. It covers recent trends in various fields of mechanical engineering. The broad range of topics and issues covered include mechanical system engineering, materials engineering, micro-machining, renewable energy, industrial engineering and additive
Foregery
发表于 2025-3-28 05:16:45
2195-4356 manufacturing. This book will be useful for students, researchers and professionals working in the area of mechanical and allied engineering discipline.978-981-16-9525-4978-981-16-9523-0Series ISSN 2195-4356 Series E-ISSN 2195-4364
Slit-Lamp
发表于 2025-3-28 07:02:33
Partnership as a Learning Processen reached by the antenna. Wireless contact in the millimeter wave needs a high gain antenna to solve the path loss issue of 2.8 dBi gain was obtained by the built antenna. For the potential millimeter wave wireless networking device, the planned one would be appropriate.
wangle
发表于 2025-3-28 11:26:22
Lecture Notes in Computer Sciencek with high performance is used. A new topology for high step-up DC/DC conversion is presented in this article with a 4.5 V input supply and a converter output of 218.2 V. The converter proposed is designed and simulated with MATLAB/Simulink.