insipid
发表于 2025-3-27 00:56:47
Co-Designing Economies in Transitions size, ownership structure and business purpose. The main aim of the study is refer to the existing conditions that determine the effectiveness of the above-mentioned activities. The paper takes into account the literature information and the author’s own experience related to his functioning as an
柏树
发表于 2025-3-27 02:41:30
From Smart Cities to Experimental Cities? space and projection on key crystal planes. 3D constructions and plane projection of the elastic properties based on the maximum, minimum and averaged values approaches is used to present and compare the anisotropy feature of the carbides. The data for E, G and Poisson’s ratio is comparatively anal
harmony
发表于 2025-3-27 06:45:53
http://reply.papertrans.cn/15/1488/148745/148745_33.png
占卜者
发表于 2025-3-27 13:04:30
Co-Designing Economies in Transitionon long the flow direction was varied with fluid velocity but not affected by the injection concentration. At 0.005 m.s. fluid velocity, maximum particle mass concentration varied with a linear relationship with particle injection mass flowrate, and the variation at 0.05 m.s. fluid velocity too show
Disk199
发表于 2025-3-27 14:45:27
https://doi.org/10.1007/978-3-658-00955-7 on the structures of the metal matrix. The quenched cast irons having lower bainite demonstrate higher wear resistance in dry friction conditions. The dependence of wear resistance on the amount of retained austenite in isothermal quenched cast irons has a nonlinear characteristic and reaches its m
设想
发表于 2025-3-27 20:09:45
http://reply.papertrans.cn/15/1488/148745/148745_36.png
Infirm
发表于 2025-3-27 22:19:58
http://reply.papertrans.cn/15/1488/148745/148745_37.png
入伍仪式
发表于 2025-3-28 06:05:06
http://reply.papertrans.cn/15/1488/148745/148745_38.png
合唱队
发表于 2025-3-28 08:00:10
Jean-Michel Mérillon,Kishan Gopal Ramawat0.08 mm/rev, and depth of hole within backup support of 0.2 mm, whereas burr thickness is the lowest in this work at a cutting velocity of 3.9 m/min, a feed rate of 0.095 mm/rev and depth of hole inside backup support of 0.56 mm. The validation tests are performed at these optimized process conditio
不可救药
发表于 2025-3-28 13:54:59
http://reply.papertrans.cn/15/1488/148745/148745_40.png