antiquated
发表于 2025-3-28 15:37:08
http://reply.papertrans.cn/15/1488/148741/148741_41.png
Obstreperous
发表于 2025-3-28 19:52:31
http://reply.papertrans.cn/15/1488/148741/148741_42.png
Critical
发表于 2025-3-28 23:06:21
Clusters in the Management Literature,g. PLA (Polylactic acid) is the most commonly used thermoplastic material due to its low cost of printing, biodegradability and the possibility of use in various industries. The trend nowadays is to design and use composite materials with different types of reinforcements such as: carbon, aramid, gl
habitat
发表于 2025-3-29 05:13:02
http://reply.papertrans.cn/15/1488/148741/148741_44.png
EXULT
发表于 2025-3-29 07:46:37
The Carpet Cluster in Gaziantep,. The thermal properties were assessed by means of differential scanning calorimetry (DSC) as well as Vicat softening temperatures (VST) were evaluated. In addition, the dimensional stability and weight of the finished products were assessed. The injection process was carried out at variable mold te
ATRIA
发表于 2025-3-29 13:47:43
https://doi.org/10.1057/9780230512467s to minimize the scrap that are cut from a set of rectangular stocks. Due to its NP-hard nature, the research is structured in four parts as: Rule-based approach (Part I), AI-based approach (Part II), Hybrid approach considering rule-based, AI-based, and brute force approaches (Part III), and compa
留恋
发表于 2025-3-29 19:33:23
Clusters in the Management Literature,composite production, i.e. in the molds. Making holes is associated with the problem of delamination, i.e. the fracture of the fiber reinforcement at the tool exit. A drill with a TiAlN coating applied by the PVD technique was used in the study. The paper presents the results of feed force measureme
RECUR
发表于 2025-3-29 23:28:31
http://reply.papertrans.cn/15/1488/148741/148741_48.png
PRE
发表于 2025-3-30 01:06:18
http://reply.papertrans.cn/15/1488/148741/148741_49.png
赦免
发表于 2025-3-30 04:15:49
D. Carter,P. F. Teague,P. M. Gray via finishing treatments. The aim of this study was to assess the effectiveness of burr removal by brushing and shot peening and to determine the impact of these treatments on selected properties of the surface layer of 1.0503 steel elements. Brushing was conducted on a vertical machining center, F