断断续续
发表于 2025-3-30 10:39:41
http://reply.papertrans.cn/15/1488/148734/148734_51.png
arterioles
发表于 2025-3-30 13:39:04
F. Müller-Spahn,C. Hock,G. Kurtzignals mentioned - current and voltage. These signals were analysed in such a way that key indicators could be derived. These key indicators were then used to carry out initial analyses, which are intended both to increase the understanding of the process and to form the basis for future analyses.
绝种
发表于 2025-3-30 19:31:23
https://doi.org/10.1007/978-3-642-93565-7d the grooves shape in both plastic formed as well as laser treated aluminum inserts. The maximal values of the joint’s failure force under tensile-shear tests were achieved for two-side laser micropatterned samples (for scanning speed 150 mm/s and interline distance 0,4 mm) and it was 1494 N. The u
RALES
发表于 2025-3-30 22:41:52
https://doi.org/10.1057/9781403914200able during this operation, and thus the longer plasticization time of the ABS material itself. At the same time, the highest quantitative particle emission values occur in said raft printing step and during the heating of the nozzle and in the first phase of correct printing. It follows that precis
limber
发表于 2025-3-31 02:29:26
http://reply.papertrans.cn/15/1488/148734/148734_55.png
PATRI
发表于 2025-3-31 08:42:26
http://reply.papertrans.cn/15/1488/148734/148734_56.png
易怒
发表于 2025-3-31 12:14:35
http://reply.papertrans.cn/15/1488/148734/148734_57.png
技术
发表于 2025-3-31 15:29:04
http://reply.papertrans.cn/15/1488/148734/148734_58.png
亲属
发表于 2025-3-31 20:11:28
Multicriteria Optimization of the Worm Gearing Drive for Tool Magazine,
condone
发表于 2025-4-1 00:42:43
Theoretical Model of the Densification During Hot Pressing and its Verification,978-1-137-31494-9