deciduous
发表于 2025-3-28 15:35:55
http://reply.papertrans.cn/15/1488/148733/148733_41.png
鄙视读作
发表于 2025-3-28 21:12:37
http://reply.papertrans.cn/15/1488/148733/148733_42.png
洞穴
发表于 2025-3-29 02:11:56
http://reply.papertrans.cn/15/1488/148733/148733_43.png
Hiatus
发表于 2025-3-29 03:19:58
http://reply.papertrans.cn/15/1488/148733/148733_44.png
Preamble
发表于 2025-3-29 10:28:43
Sebastian Lins,Stephan Schneider,Ali Sunyaevoordinate Measuring Machine (CMM). Considering the contact point identified by orthogonal to the surface probe movement, transformation of coordinates was made in order to calculate the displacement of the measured point. As a result, positioning accuracy was estimated in three axes. The experiments
Fecundity
发表于 2025-3-29 15:05:16
Sebastian Lins,Stephan Schneider,Ali Sunyaev shelf components was used together with self-written data evaluation software. Testing was performed on a polymer strap glued to a metal one of the same size, with purposely made breaks in the glue layer. Connection defects, their location, size and shape could be detected using three different def
Detain
发表于 2025-3-29 16:43:10
https://doi.org/10.1007/978-3-662-47286-6sive environment. To protect the critical components’ surface from such a degradation, various surface treatments are applied. The selected High Pressure/High Velocity Oxygen Fuel (HP/HVOF) sprayed coatings were tested in terms of mechanical, tribological and corrosion behavior and their performance
使高兴
发表于 2025-3-29 20:12:14
Cloud-Services aus der Geschäftsperspektivengle formation with and without support. The measured data were compared with a CAD model, which also served as an input element to a 3D printer. The experiment points out the possibilities of creating angles without support up to certain degrees and their deviation from the ideal body.
担忧
发表于 2025-3-30 03:45:03
Relevante Rechtsfragen des Cloud-Computing The work focuses on high quality requirements for threads produced for the needs of the aviation industry. The authors noticed that the classic measurement methods are mainly manual, but in recent years attempts have been made to automate the control of this type of elements. Selected methods found
Intervention
发表于 2025-3-30 08:00:12
Cloud-Services aus der Geschäftsperspektiveansverse sections (measured perpendicular to feed direction) during face finish milling. It was found that diversification of deviations in various sections is a result of geometrical action of the mill relative to workpiece movement. Original method of improving flatness by compensation path prepar