鉴赏家
发表于 2025-3-28 17:10:17
http://reply.papertrans.cn/15/1488/148732/148732_41.png
Isthmus
发表于 2025-3-28 19:24:04
https://doi.org/10.1007/978-3-658-20973-5 of their work. Generation of alternating forces is additionally exacerbated by imbalance of the rotating elements of the machine as well as external interactions influencing its foundation or supporting structure. Appropriate selection and distribution of elements coupling the foundation and the ba
ESPY
发表于 2025-3-28 23:31:41
https://doi.org/10.1007/978-3-658-20973-5 applying a gravity balanced mechanical systems. The objective of the paper is to design a cam-roller follower mechanism to gravity balance a wire rope hoist for lifting loads. It is analysed how various geometric features affect the applicability of the cam mechanism (jerks, pressure angle, roller
古文字学
发表于 2025-3-29 03:55:16
http://reply.papertrans.cn/15/1488/148732/148732_44.png
immunity
发表于 2025-3-29 07:39:25
Cloud-IoT Technologies in Society 5.0gue strength. In this article, high-cycle fatigue life of auxetic re-entrant structure unit cell was calculated using Finite Element Analysis. A fully reversed cycle consisting of alternating compressive and tensile loads was applied. Also, stress-life data had to be defined as approximated Wohler’s
讨好美人
发表于 2025-3-29 11:36:15
Cloud-Native Application Architecturearacter. Modern machine tools very often have a structure similar to the bodies of machines of the previous generation. The vast majority of currently manufactured machine tool bodies are made in the form of grey iron castings. However, their relatively high mass, high cost for unit production, and
谄媚于人
发表于 2025-3-29 19:21:52
http://reply.papertrans.cn/15/1488/148732/148732_47.png
排名真古怪
发表于 2025-3-29 23:00:09
http://reply.papertrans.cn/15/1488/148732/148732_48.png
Perennial长期的
发表于 2025-3-30 02:36:17
http://reply.papertrans.cn/15/1488/148732/148732_49.png
RAG
发表于 2025-3-30 04:34:54
https://doi.org/10.1007/978-1-4020-8276-4h a hardness about 220 HB were burnished with a roller with different force. Researches were carried out with particular attention to the structure of the outflowing material in the tool zone during burnishing process. The article presents the results of the examinations of burnished surfaces which