巧办法
发表于 2025-3-23 12:59:11
http://reply.papertrans.cn/15/1485/148469/148469_11.png
热烈的欢迎
发表于 2025-3-23 14:44:16
Model Reduction for Discrete 2-D Switched Systems in the Roesser Model,r model. Given an asymptotically stable system, our purpose is to design a stable reduced-order system such that the corresponding error system is asymptotically stable with a prescribed . performance level. By employing a switched Lyapunov function technique, a sufficient condition is proposed to e
名字
发表于 2025-3-23 19:08:18
Modeling and Simulation of DFIG Based Wind Turbine System Using Sliding Mode Control,e the stator active and reactive power of the DIFG to track their references generated by the wind turbine system, in this sense a sliding mode control method is proposed. This technique has the advantage of making any system either linear or not resistant to external disturbances and internal param
NATTY
发表于 2025-3-23 22:51:29
Towards a Comparative Assessment Between Physical and Characteristic of Tire of Two-Wheeler Vehicleance of the vehicle and the rider, his safety and comfort which are massively influenced by the physical and geometric characteristic of tires. This paper deals with a quantitative and qualitative approach and a compare between four well-known models of tire model such Pacejka tire, modified Dugoff
刚毅
发表于 2025-3-24 05:27:34
http://reply.papertrans.cn/15/1485/148469/148469_15.png
BIDE
发表于 2025-3-24 09:09:52
5G Network Conception in Fez City Center,volutionary milestone, the researches and the works are still in progress..The main goal of this perceivable work is to construct a 5G network in the center of Fez City. Our construction study is based on the visualization of the signal-to-interference-and-noise ratio (SINR) on this environment, in
Ingrained
发表于 2025-3-24 14:08:47
http://reply.papertrans.cn/15/1485/148469/148469_17.png
荒唐
发表于 2025-3-24 18:21:12
Ceramic Paste Extruder of 3D Printing: Status, Types, and Prospects,and builds parts in a layer-by-layer style. Since about three decades ago, AM technologies have been used to fabricate prototypes or parts mostly from polymeric or metallic materials. However, 3D printing of ceramics is getting growing attention. It is an appropriate method to answer the increased d
upstart
发表于 2025-3-24 21:34:53
http://reply.papertrans.cn/15/1485/148469/148469_19.png
inchoate
发表于 2025-3-25 02:59:14
Mercedes Jaschek,Philip C. Keenan stable, by basing on the generalized Kalman. Yacubovich. Popov (GKYP) Lemma to isolate the body from road disturbances and improve the ride comfort in the specific frequency band hz. The theory is illustrated by simulation results to demonstrate the effectiveness of the proposed method.