笨拙的你
发表于 2025-3-30 12:14:06
SpringerBriefs in Molecular Sciencetiveness of the high-velocity forming. From the results, it is observed that the sheet is deformed uniformly without strain localization and the limiting strains are increased by 50–60% after the high-velocity forming.
BRIBE
发表于 2025-3-30 12:42:48
http://reply.papertrans.cn/15/1481/148078/148078_52.png
袖章
发表于 2025-3-30 20:21:56
http://reply.papertrans.cn/15/1481/148078/148078_53.png
记忆
发表于 2025-3-30 21:59:56
http://reply.papertrans.cn/15/1481/148078/148078_54.png
mechanical
发表于 2025-3-31 00:59:48
https://doi.org/10.1007/978-94-009-3665-2udy of the microhardness profile in the subsurface region also showed that the workpiece turned with MQL had a crust with lower hardness than a workpiece turned without MQL. This would result in higher fatigue life of the hard-turned component.
爱哭
发表于 2025-3-31 06:45:22
http://reply.papertrans.cn/15/1481/148078/148078_56.png
Consequence
发表于 2025-3-31 12:57:32
Cytochemistry of the Nucleic Acids,, as molybdenum is difficult to form by cold working. Effect of warm working of the molybdenum material is studied. Design of blank and pre-form along with Press tools for making pre-form, rollers, mandrels, and tailstock support has been brought out. The process parameters such as speed and feed used in the process are explained in brief.
Barrister
发表于 2025-3-31 15:14:28
On the Dissociation of Chemical Bonds,emoval. In this study, minimum quantity lubrication (MQL)-assisted CPG experiments are carried out to find the effect of process parameters on the cutting force. Box-Behnken design (BBD) was selected to generate the experimental runs. Analysis of variance is performed, and the significant parameters which affect cutting force are found out.
表两个
发表于 2025-3-31 18:22:06
Murray S. Daw,Michael I. Baskes The acquired AE sensor signal is analysed in the time- and frequency domains, whereas the cutting force signal is analysed in the time domain. The result indicated that AE and cutting force signals are influenced by the changes in the input process parameters conditions.
使害怕
发表于 2025-3-31 21:50:59
Surface Chemistry in Aqueous Solutionsost. In the present work, a novel method of application of a cheap detergent–water solution with the help of a micropump is highlighted and a comparative study is made with conventional cutting fluids in terms of force requirements, surface quality, specific energy, grinding ratio and chip form observations.