孤独无助
发表于 2025-3-26 23:44:59
https://doi.org/10.1007/978-1-4899-3368-3ous diseases that thread human health. Amongst a lot of methods that have been developed to measure glucose levels, electrochemical glucose sensors have attracted more attention due to their accuracy and efficiency. In our work, a simple, instant, and economical chemical process was conducted to dep
整顿
发表于 2025-3-27 03:31:54
James R. Miller,Karen L. Stricklerine/Matlab 2019 tools. The model consists of 4 subsystems: engine, dual-clutch transmission, control block, and vehicle body. Using the model allows determining the influence of structural parameters, working conditions on the vehicle’s kinematics and dynamics. Some simulation results of kinematics
aviator
发表于 2025-3-27 08:48:15
Chemo-orientation in Flying Insectsstrength to ensure the working conditions with very high speed, pressure and temperature. This paper presents the research results of the effects of temperature and heat retention time at high tempering on the hardness and tensile strength of the turbine shaft in the HX40W model turbocharger structu
endoscopy
发表于 2025-3-27 11:09:30
Joseph S. Elkinton,Ring T. Cardé the authors study on the effects of the tire vertical stiffness on dynamic load acting on DVM 2.5 truck. The method of structural separation multi-body system and the Newton–Euler equation are used to set the three-dimensional dynamics model. Matlab-simulink software is used to consider the effects
condescend
发表于 2025-3-27 15:56:20
http://reply.papertrans.cn/15/1480/147977/147977_35.png
暂时过来
发表于 2025-3-27 18:22:43
http://reply.papertrans.cn/15/1480/147977/147977_36.png
围裙
发表于 2025-3-27 23:27:14
http://reply.papertrans.cn/15/1480/147977/147977_37.png
小歌剧
发表于 2025-3-28 05:15:57
http://reply.papertrans.cn/15/1480/147977/147977_38.png
Thymus
发表于 2025-3-28 07:25:43
http://reply.papertrans.cn/15/1480/147977/147977_39.png
Bumble
发表于 2025-3-28 14:04:34
Louise E. M. Vet,W. Joe Lewis,Ring T. Cardés, the kinematic model of the robot is included to examine parameters such as leg tilt, average moving velocity, position, and trajectory of the robot’s legs. Using the inversion mechanism method, the basic calculation can determine the movement of the mechanism on the bar during the operation.