HILAR
发表于 2025-3-26 21:06:36
http://reply.papertrans.cn/15/1480/147976/147976_31.png
疏远天际
发表于 2025-3-27 04:54:40
Maria Arménia Carrondo,George A. Jeffreyas applied to solve the MCDM problem and the Entropy method was used to determine the weight of criteria. Two criteria including the surface roughness (RS) and the material removal speed (MRS) were selected for the problem. In addition, an experiment with design L18 (6. + 3.) using Taguchi method wa
Progesterone
发表于 2025-3-27 09:12:21
http://reply.papertrans.cn/15/1480/147976/147976_33.png
婚姻生活
发表于 2025-3-27 09:36:20
J. Goulon,M. Loos,P. Friant,M. Ruiz-Lopez a simulation experiment is designed and carried out. In the experiment, four main input factors including the total gearbox ratio, the coefficient of wheel face of stage 2, the allowable contact stress of stage 2, and the output torque were investigated. The effect of input factors on optimal gear
不可知论
发表于 2025-3-27 15:03:11
https://doi.org/10.1007/978-94-009-4027-7 or recycling. In the process of working, the cutter is gradually worn, affecting the working ability of the machine. When the tool wears to the limit value corresponding to one cycle of tool life, the machine must stop working to change the tool. The fabric shredding efficiency and productivity of
ENNUI
发表于 2025-3-27 18:49:37
H. Thomas Milhorn Jr. M.D., Ph.D.mous Underwater Vehicles (AUVs). This model covers all steps including the requirements management, analysis, design, and implementation to conveniently realize controllers for most standard AUV platforms. It also allows the designed elements to be customizable and re-usable in the development of ne
恃强凌弱的人
发表于 2025-3-27 22:23:20
http://reply.papertrans.cn/15/1480/147976/147976_37.png
曲解
发表于 2025-3-28 02:26:41
http://reply.papertrans.cn/15/1480/147976/147976_38.png
Coterminous
发表于 2025-3-28 08:44:27
http://reply.papertrans.cn/15/1480/147976/147976_39.png
发酵剂
发表于 2025-3-28 12:42:59
http://reply.papertrans.cn/15/1480/147976/147976_40.png