极深
发表于 2025-3-28 17:31:01
Standards in der Thoraxchirurgie a hydrostatic transmission (HST) drive. This article presents the steady-state behaviours of two different HST drives for the rotary head of drill machine. In the first drive two high-speed low-torque (HSLT) hydro-motors, having an individual capacity of 10 cc/rev with the gear reducer having 15:1
Unsaturated-Fat
发表于 2025-3-28 21:40:55
http://reply.papertrans.cn/15/1480/147964/147964_42.png
疏远天际
发表于 2025-3-29 00:16:40
Standards in der Mammachirurgiehanced RF-Performance is presented. The switches are modelled using previously known theory from the literature. The various performance parameters are computed like modal frequencies, Casimir force, electrostatic force, capacitance, release time, actuation voltage and S-parameters are computed usin
SLUMP
发表于 2025-3-29 03:51:56
https://doi.org/10.1007/b138772ial with varying concentrations. To assess test data, Taguchi’s design of experimentation is used. The influence of test parameters on erosion wear could be estimated by computing signal-to-noise ratio and analysis of variance. L. (3.) orthogonal array is used for the investigation. From analysis of
oxidant
发表于 2025-3-29 07:17:37
Standards in der Gefäßchirurgieure both. In this study, modal analysis has been performed on 54 kg Indian human subject to find out the natural frequency and deformations for both sitting and standing posture under un-damped vibration conditions. An ellipsoidal approach has been used to model human subject as 3-D CAD model using
triptans
发表于 2025-3-29 12:00:31
http://reply.papertrans.cn/15/1480/147964/147964_46.png
avenge
发表于 2025-3-29 18:29:43
http://reply.papertrans.cn/15/1480/147964/147964_47.png
Melatonin
发表于 2025-3-29 22:18:40
http://reply.papertrans.cn/15/1480/147964/147964_48.png
使无效
发表于 2025-3-29 23:52:38
http://reply.papertrans.cn/15/1480/147964/147964_49.png
小口啜饮
发表于 2025-3-30 06:49:41
Standards in der Kinderchirurgiehe exhaust gases coming from the combustion chamber. Designing and manufacturing of a muffler of our desire used to be a very long process of hit-and-trial method which would then be dragged by a number of tests. Due to environmental regulations, companies use reliable methods for modeling and testi