金哥占卜者
发表于 2025-3-25 04:23:06
http://reply.papertrans.cn/15/1480/147959/147959_21.png
Detain
发表于 2025-3-25 08:02:45
http://reply.papertrans.cn/15/1480/147959/147959_22.png
aggravate
发表于 2025-3-25 12:49:47
Chatbots in der Kundenkommunikationes after neutron irradiation. The sample section in its polished state was characterized and analysed using metallographic microstructure observation, element energy spectrum analysis and the micro-region Vickers hardness (Hv) method. The experimental results show that the influence of the layer thi
偏见
发表于 2025-3-25 16:23:29
https://doi.org/10.1007/978-3-319-05236-6iments have shown, however, that these elements will segregate and lead to clusters in the matrix after neutron/ion radiation. These segregation/clusters will reduce the toughness in the material. In this work, we simulated the radiation-induced segregation (RIS) along the ion path in bcc Fe–1.4at.%
GEAR
发表于 2025-3-25 23:34:28
https://doi.org/10.1007/978-3-319-05236-6e results show that the tempering temperature is the most important factor affecting the yield strength (R.) and elongation (EL%) of HT-9 steel. With the increments of tempering temperature, EL% increases and R. decreases gradually. Both normalizing temperature and tempering temperature show influen
共同确定为确
发表于 2025-3-26 04:06:38
https://doi.org/10.1057/9781403907240olution of Zr–0.5Sn–0.15Nb–0.75FeV alloy tube during fabrication. The morphologies of grain and second phase particles (SPPs), their shape, size and distribution have been studied in detail using optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM).
Canopy
发表于 2025-3-26 04:33:17
https://doi.org/10.1057/9781403907240bes, were tested in static autoclave in 360 ℃/18.6 MPa pure water, 360 ℃/18.6 MPa/0.01 mol/L LiOH aqueous solutions and 400 ℃/10.3 MPa steam. The microstructure characteristics were analyzed by Transmission Electron Microscope (TEM) and Scanning Electron Microscope (SEM). It was shown that the corro
cavity
发表于 2025-3-26 11:55:18
Introduction: Prologue and Tale,as studied by X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy and electron backscattered diffraction. Many cavities or pores caused by helium sputtering were observed on the surface of the samples, and the surface damage of tungsten by helium irradiation was a
forecast
发表于 2025-3-26 13:21:22
Introduction: Prologue and Tale,enerally used to describe and classify these damage morphologies, which is not conductive to reveal the essential relationship between different damage structures and the influence rules of different irradiation conditions. Based on texture feature analysis, this work provides a classification and c
JOT
发表于 2025-3-26 19:47:09
https://doi.org/10.1057/978-1-137-43637-5nder molten salt environment were tested at different temperatures. The results showed that the extrudability of GH3535 alloy was fine at 1150–1250 ℃, and the mechanical properties of hot-extruded GH3535 alloy pipe were excellent and the microstructure was uniform. The average grain size of GH3535 s