茁壮成长
发表于 2025-3-30 09:15:00
Perfusion Studies and Fast ImagingSolidWorks Simulation application; the control system of the experimental prototype is developed using Arduino software and hardware; the experimental data is processed with the help of the Serial Port Plotter software. The main results of the theoretical research present the specific geometrical pa
gerontocracy
发表于 2025-3-30 12:53:44
http://reply.papertrans.cn/15/1478/147795/147795_52.png
scotoma
发表于 2025-3-30 18:27:35
http://reply.papertrans.cn/15/1478/147795/147795_53.png
史前
发表于 2025-3-30 20:51:44
http://reply.papertrans.cn/15/1478/147795/147795_54.png
热情赞扬
发表于 2025-3-31 01:02:16
http://reply.papertrans.cn/15/1478/147795/147795_55.png
slow-wave-sleep
发表于 2025-3-31 05:48:41
Measurement and Interpretation of T1 and T2e hydraulic drive, the amplitude of pressure and torque surges are determined by the safety valve’s opening time. Using a passive pulsation damper increases the opening time of the safety valve by 7 times, making it possible to reduce pressure and torque surges by 2.2 times. In steady-state operatio
全等
发表于 2025-3-31 10:41:37
http://reply.papertrans.cn/15/1478/147795/147795_57.png
废除
发表于 2025-3-31 14:10:35
B. Ekström-Jodal,E. Häggendal,N. J. Nilssonoptimal operational parameters to ensure a high degree of separation of the gas mixture components. For the numerical study and optimization of chemical-technological processes of gas preparation plants intended to produce hydrocarbon products, the static and dynamic optimization simulations of chem
使人入神
发表于 2025-3-31 21:15:09
Alexander Hartmann,Siegfried Hoyerr gas and mass flow rates of bulk material in the inlet and outlet channels. The ejector characteristics were studied based on solving the Reynolds-averaged Navier-Stokes equations using the SST turbulence model. The flow rate of solid particles at the device outlet correlates with the diameter of t
圣歌
发表于 2025-3-31 21:40:24
Acta Neurochirurgica Supplementys in the chamber, and increasing the degree of grinding. The energy capacity reaches its minimum value at the rotor rotation frequency range from 14 to 19 s. (depending on the material feed). In contrast, the sieving capacity of the recutters will coincide with the productivity of the flow of crush