模范
发表于 2025-3-25 05:49:41
Popped and Puffed Cereal Products,ratrix. It is shown that this method of increasing the thickness of the finished part wall is efficient and does not require special costs. The thickness of the finished product at the end of the billet will depend on the location of the conical protrusion on the punch, its length, and the geometric
BILE
发表于 2025-3-25 07:34:38
http://reply.papertrans.cn/15/1478/147791/147791_22.png
indubitable
发表于 2025-3-25 13:13:17
The Holy Grail of Ancient Cereals, improving the accuracy of molding by monolithic carbide reamers. The effect of technological parameters on the statistical relationship between the magnitude of the hole deployment and the roughness of the processing surfaces was also studied. For the sake of clarity of the advantages of solid carb
epidermis
发表于 2025-3-25 18:03:01
http://reply.papertrans.cn/15/1478/147791/147791_24.png
杀菌剂
发表于 2025-3-25 21:35:10
Triticale: A “New” Crop with Old Challenges interelectrode gap was obtained, with the help of which it is possible to determine the value of the optimal interelectrode gap for various electrical parameters of electrical discharge grinding. It was established that the most significant factors that affect the interelectrode gap are the voltage
生命层
发表于 2025-3-26 03:01:40
Breeding for Grain Quality Traitsal displacements of shell middle surface points (coupling), due to the annular force applied in its arbitrary cross-section, as well as the angles of rotation of the normal to its middle surface caused by these force factors. The fact that the annular moments in the right and left parts of the coupl
JIBE
发表于 2025-3-26 05:46:02
http://reply.papertrans.cn/15/1478/147791/147791_27.png
枪支
发表于 2025-3-26 10:56:49
http://reply.papertrans.cn/15/1478/147791/147791_28.png
慢跑鞋
发表于 2025-3-26 13:33:01
Complex Recognition Approach for Cutting Part of Cutters in Finishing Turning978-1-349-08271-1
anachronistic
发表于 2025-3-26 18:09:36
http://reply.papertrans.cn/15/1478/147791/147791_30.png