modish 发表于 2025-3-30 09:20:12

Advances in Design, Simulation and Manufacturing IIIProceedings of the 3

Anticoagulants 发表于 2025-3-30 13:20:34

Interface Mechanics and Toughness,s and various widths of gaps. The analytical solution is received for coaxial cylindrical shells, including a limit case of the infinitesimal gap. This solution can be considered as a benchmark test and allows us to validate the proposed numerical method.

挖掘 发表于 2025-3-30 17:18:26

Overview Membranes Separations,g of ceramics is cyclical. It is accompanied by the separation of the micro-particles. The destruction of the material occurs along the grain boundaries of Al.O., internal defects, and glass-visible phase. The wear rates are similar for the tested specimens. The cyclical nature of ceramic wear is id

微枝末节 发表于 2025-3-30 22:25:51

http://reply.papertrans.cn/15/1478/147789/147789_54.png

慷慨援助 发表于 2025-3-31 04:03:48

M. Hidalgo,P. Callejas,J. Ma. Rincónhatronic system with a hydraulic drive of the active working bodies of self-propelled vehicles have been substantiated. This technique involves five stages: the choice of the mechatronic system parameters; substantiation of optimized control parameters; development of a mechatronic system model; opt

中世纪 发表于 2025-3-31 08:49:57

H. Sakai,T. Soma,M. Matsui,I. Odasolution of mathematical model equations and obtaining graphs of transients in a hydraulic drive. The algorithm for data exchange in the MATLAB Simulink system and the GUI graphical interface program, which implements data exchange, allows us to investigate the influence of the parameters of a load-

贸易 发表于 2025-3-31 11:19:40

Microdesigning of Ceramic-Metal Compositesfor the environmental impact: since every utility needs the engine to be always active, with an electric source we could power every utility of the semi-trailer without using the engine so that we could avoid the unnecessarily introduction of pollutants into the atmosphere.

盖他为秘密 发表于 2025-3-31 15:52:06

Dibyendu Ganguli,Minati Chatterjeeeffects of streamline curvature and system rotation is presented. The application of the RANS approach using the adjusted SST turbulence model allows quickly determining all the main characteristics of the swirl flow using medium-power computers. An analysis of the operation mode of confusers of dif

妨碍议事 发表于 2025-3-31 17:30:52

http://reply.papertrans.cn/15/1478/147789/147789_59.png

onlooker 发表于 2025-4-1 00:43:52

http://reply.papertrans.cn/15/1478/147789/147789_60.png
页: 1 2 3 4 5 [6] 7
查看完整版本: Titlebook: Advances in Design, Simulation and Manufacturing III; Proceedings of the 3 Vitalii Ivanov,Ivan Pavlenko,Milan Edl Conference proceedings 20