愉快吗
发表于 2025-3-25 06:25:48
http://reply.papertrans.cn/15/1466/146522/146522_21.png
Ornithologist
发表于 2025-3-25 10:26:38
http://reply.papertrans.cn/15/1466/146522/146522_22.png
针叶树
发表于 2025-3-25 15:24:16
https://doi.org/10.1007/978-94-6300-355-1erronickel slag, this chapter provides recent advances in using the slag for producing refractory materials and lightweight thermal insulation materials, covering thermodynamic analysis, experimental exploration, and production verification.
cushion
发表于 2025-3-25 16:08:26
https://doi.org/10.1007/978-94-6300-355-1ehaviors of SSPS, including the thermodynamics, phase transformation and off-gas emission characteristics during reductive roasting were primarily investigated. The presence of laterite ore enhanced the desulfurization of SSPS which could facilitate the subsequent reductive smelting of the calcine obtained by reductive roasting.
Inscrutable
发表于 2025-3-25 23:44:33
http://reply.papertrans.cn/15/1466/146522/146522_25.png
Euphonious
发表于 2025-3-26 02:09:53
Book 2023ainless-steel making, it presents pioneering technologies of utilization of ferronickel slag for producing value-added functional materials and recycling of stainless-steel pickling sludge for ferronickel making. This book is expected to offer the audiences a fascinating new insight into ferronickel making and related by-products valorization..
reptile
发表于 2025-3-26 06:18:30
http://reply.papertrans.cn/15/1466/146522/146522_27.png
LEERY
发表于 2025-3-26 10:26:29
https://doi.org/10.1007/978-1-4612-2578-2] and FeO content of the slag was proposed, instead of solely controlling the MgO/SiO. mass ratio, to facilitate smelting. The high efficiency of the new method was further verified through the lab-scale, pilot-scale and industrial tests, respectively.
和谐
发表于 2025-3-26 13:42:30
http://reply.papertrans.cn/15/1466/146522/146522_29.png
Intact
发表于 2025-3-26 20:27:59
Blowup for Nonlinear Hyperbolic Equationsgy of softening–melting performance of laterite ore based on the quaternary basicity control was proposed. The efficiencies of the regulation technology applied in the Krupp–Renn process and sintering process were also verified.