不要不诚实
发表于 2025-3-23 10:20:01
https://doi.org/10.1007/978-981-10-2845-8mobile robots; robotics; manipulators; computer hardware; sensors; computer systems
Feature
发表于 2025-3-23 15:37:36
http://reply.papertrans.cn/15/1465/146474/146474_12.png
依法逮捕
发表于 2025-3-23 20:51:53
http://reply.papertrans.cn/15/1465/146474/146474_13.png
MELD
发表于 2025-3-24 00:03:42
https://doi.org/10.1057/9780230503977 Atomic Research Centre has been working on the development of remote handling tools for in house applications. The experience in each development has germinated the development of a more advanced system. This paper tries to graph this evolution of remote handling technology as an indispensable part
Malleable
发表于 2025-3-24 05:46:49
https://doi.org/10.1057/9780230503977de and the water/steam in the tube side. The integrity of these tubes is ascertained by periodic in-service inspection (ISI) procedures. Remote Field Eddy Current Testing (RFEC) is preferred as the SG tubes are ferromagnetic. Inverse kinematic (IK) algorithm has been developed and implemented in the
带来墨水
发表于 2025-3-24 07:28:11
http://reply.papertrans.cn/15/1465/146474/146474_16.png
Negligible
发表于 2025-3-24 11:39:41
http://reply.papertrans.cn/15/1465/146474/146474_17.png
–吃
发表于 2025-3-24 15:43:11
Distribution Economics: Introduction,carry a radiation sensor. However since the robot has to go very near to the source of radiation, the life of the robot’s components is compromised due to high level of absorbed dose. We had earlier managed to increase the life expectancy of remote radiation measurement robots by allowing the sensor
继承人
发表于 2025-3-24 21:44:26
Materials Handling: Introduction,both ground and water surfaces. The proposed system has two major mechanisms for its motion namely a planar eight bar Jansen mechanism as a leg and an Ackermann steering mechanism as for turning. The performance of the proposed mechanisms is verified in terms of motion, force (motion/walking) and st
CRAMP
发表于 2025-3-25 01:59:38
https://doi.org/10.1007/978-3-658-19702-5ctrical device not only manually i.e. through the computer but also automatically i.e. based on displacement. To evaluate the controller, an experimental set-up has been designed for investigating the thermo mechanical behavior of equiatomic Nitinol spring. Parameters such as load and position was v