Accolade
发表于 2025-3-25 05:09:37
Thymoquinone: Chemistry and Functionalityheet. A tensile testing specimen with notches made of high strength steel sheet is loaded and the surface displacements are measured from both sides of the specimen surface using two stereovision systems. Not only the in-plane strains but the through-thickness strains are evaluated from the measurem
Ingest
发表于 2025-3-25 08:21:52
The Cost of the Famine Immigration,al strain fields which occur between aggregates and mastic (i.e., asphalt binder + filler) is however crucial to understand the phenomena that influence the global response of such materials, and then better design them. In this study, full-field measurements were used to investigate the difference
碎石
发表于 2025-3-25 11:41:31
Glasgow, South Wales and the Irish Fever,ters to describe the experimentally observed mechanical behavior of a test specimen, based on digital images taken during the experiment. In contrast to regular digital image correlation techniques, where grayscale speckle patterns are correlated, the images used in MSC are projections of the sample
姑姑在炫耀
发表于 2025-3-25 18:38:38
Sebastian Giacovelli,Sina Goldkampso to make the boundary conditions in the FE simulation match the real experiment. Another issue is the robustness and convergence of the IDIC algorithm itself, especially in cases when (FEM) simulations are slow. These two issues have been explored in this proceeding. The basis of the algorithm is
婴儿
发表于 2025-3-25 22:58:07
https://doi.org/10.1007/978-3-531-91560-9ata processing; (4) data analysis. Phase retrieval and processing are very important in fringe analysis. In [.], these steps were discussed for 1D signals, introducing a 2D abstract space as phase evaluation requires a vectorial function. The Hilbert transform allows to obtain signal in-quadrature d
flex336
发表于 2025-3-26 03:12:27
https://doi.org/10.1007/978-3-531-91560-9lation. A 2D plane of uniquely shaped speckles are introduced to a volume of the YSM using a 3D printing technique. A cylindrical object, is dragged through the 2D plane at four different speeds each with four different diameters. The displacements caused by the cylinder were found and analyzed.
向下
发表于 2025-3-26 06:25:33
http://reply.papertrans.cn/15/1465/146463/146463_27.png
sulcus
发表于 2025-3-26 09:01:33
http://reply.papertrans.cn/15/1465/146463/146463_28.png
capsaicin
发表于 2025-3-26 14:58:12
http://reply.papertrans.cn/15/1465/146463/146463_29.png
极少
发表于 2025-3-26 19:43:05
The Generic Composite Residuosity Problem,providing the sufficient laser power per area. However, high-power lasers lead increasing the risk of exposure to laser, the size of the equipment and the cost. In this study, ESPI with line laser scanning is investigated for large area deformation measurements without increasing the laser power. A