漂亮才会豪华
发表于 2025-3-27 00:47:45
https://doi.org/10.1007/978-3-319-45708-6The goal of kinematic analysis is to determine velocities and accelerations of mechanism points, as well as angular velocities and accelerations of links. In addition, analogously to the geometric analysis, direct and inverse problems are solved.
打击
发表于 2025-3-27 03:41:48
Biophysics of Skin and Its TreatmentsMechanisms are used not only for producing program motions but also for transmitting forces, necessary, both, for performing working processes and for overcoming the inertia of moving links. For this reason the kinematic and geometric investigation must be complemented by the analysis of forces in the process of mechanism design.
deadlock
发表于 2025-3-27 08:43:31
Biophysics of Skin and Its TreatmentsAt kinematic pairs of real mechanisms friction forces are acting. In many cases these forces have a major influence on the mechanism motion and must be taken into account in the force analysis.
恸哭
发表于 2025-3-27 10:20:47
https://doi.org/10.1007/978-3-540-46516-4Rotor; control; design; friction; inverse problem; kinematics; mechanical engineering; production; resonance
sclera
发表于 2025-3-27 17:41:26
978-3-642-53672-4Springer-Verlag Berlin Heidelberg 2000
有说服力
发表于 2025-3-27 19:58:03
http://reply.papertrans.cn/15/1464/146347/146347_36.png
生气的边缘
发表于 2025-3-27 23:08:01
Foundations of Engineering Mechanicshttp://image.papertrans.cn/a/image/146347.jpg
网络添麻烦
发表于 2025-3-28 03:20:57
Biophysics of Skin and Its Treatmentsransformation of initial raw materials into half- or fully finished products; such working processes are referred to as .. Technological processes involve . of materials to the place of utilization as well as . processes, i.e. generation and transformation of energy in forms most convenient for the
把…比做
发表于 2025-3-28 09:10:18
http://reply.papertrans.cn/15/1464/146347/146347_39.png
Graves’-disease
发表于 2025-3-28 12:38:45
Keith Burridge,Winthrop T. Jackmana working proccess. In a real machine the actual motion differs from the program motion. This difference is primarily related to the properties of the engine, setting the machine in motion and generating driving forces applied to input links. The output velocity of the engine depends on the magnitud