太空 发表于 2025-3-23 13:40:39

https://doi.org/10.1007/978-3-86226-306-6rinciples, were presented, along with many additional effects that are of particular interest in various manufacturing processes. The solution to these equations is needed in order to provide information on the behavior of the system and its dependence on the important parameters in the problem. The

客观 发表于 2025-3-23 15:43:47

https://doi.org/10.1007/978-3-86226-306-6fairly wide range of materials processing applications, such as casting, crystal growing, welding, soldering, thermal sprays, injection molding, and additive manufacturing. Extensive work has been done on melting and solidification processes to determine the basic characteristics of the process, tim

Charlatan 发表于 2025-3-23 20:09:36

https://doi.org/10.1007/978-3-86226-306-6r production rates and lower costs. A wide range of processes can be considered for continuous processing. These include hot and cold rolling, extrusion, wire and fiber drawing, heat treatment of moving materials, and deposition on continuously moving surfaces. The problem is time dependent at the s

inspired 发表于 2025-3-24 00:49:23

http://reply.papertrans.cn/15/1459/145884/145884_14.png

upstart 发表于 2025-3-24 06:15:40

https://doi.org/10.1007/978-3-86226-306-6brication of thin films for materials such as silicon, titanium nitride, and gallium nitride. The different types of reactors, modeling of the flow, heat and mass transfer, and chemical reactions are considered in detail. Numerical and experimental results are presented for a variety of conditions a

Perigee 发表于 2025-3-24 08:58:20

Bildung durch interkulturelle Begegnung arise are discussed, along with results from analytical, numerical, and experimental studies. Starting with the fabrication of the preform, this chapter discusses the thermal transport in the draw furnace and the flow in silica glass. Of particular interest are the neck-down profile, defects genera

garrulous 发表于 2025-3-24 14:38:40

http://reply.papertrans.cn/15/1459/145884/145884_17.png

过于平凡 发表于 2025-3-24 16:01:59

Bildung für Arbeit unter neuer Steuerung length scales, whereas the boundary and initial conditions are imposed at the engineering or macroscale. The manufacturing systems are also at engineering scales, even though the devices like thin films and optical fibers are microns in thickness or diameter. Thus, a multiscale problem arises in mo

小样他闲聊 发表于 2025-3-24 22:29:58

http://reply.papertrans.cn/15/1459/145884/145884_19.png

议程 发表于 2025-3-25 03:09:51

ktionellen Krankheitsbildern und mannigfaltigen therapeutischen Optionen, stellt die proktologische Basisdiagnostik auch den geübten Proktologen immer wieder vor Herausforderungen und ist maßgeblich für eine exakte Patientenselektion und den Behandlungserfolg des Patienten verantwortlich.
页: 1 [2] 3 4 5
查看完整版本: Titlebook: Advanced Materials Processing and Manufacturing; Yogesh Jaluria Book 2018 Springer International Publishing AG, part of Springer Nature 20