CUR
发表于 2025-3-23 13:32:47
https://doi.org/10.1007/978-3-663-13702-3portant and diffused models are described and analysed in order to outline the advantages offered by each of them. Some applications to typical metal forming processes are presented, carrying out a comparison between the numerical predictions and the experimental verifications.
ELUDE
发表于 2025-3-23 16:09:06
http://reply.papertrans.cn/15/1459/145860/145860_12.png
EWE
发表于 2025-3-23 19:48:40
http://reply.papertrans.cn/15/1459/145860/145860_13.png
侧面左右
发表于 2025-3-24 00:13:36
Grundbegriffe und Grundtatbestände(tap) with a given cutting geometry adopted for tapping into steel or Al-alloys. The parameters of cutting were chosen from the technological database with respect to particular machined material / cutting tool combinations.
Visual-Field
发表于 2025-3-24 05:54:10
Begriff und Ziele der Bilanzpolitikrt of the paper the possibility of minimising of cutting forces and torque in drilling is discussed. The influence of different modifications of chisel edge was investigated experimentally. The results of these investigations and conclusions are presented in the paper.
NICHE
发表于 2025-3-24 07:16:23
Advanced Manufacturing Systems and Technology978-3-7091-2678-3Series ISSN 0254-1971 Series E-ISSN 2309-3706
Ballad
发表于 2025-3-24 11:30:35
http://reply.papertrans.cn/15/1459/145860/145860_17.png
Trabeculoplasty
发表于 2025-3-24 17:19:14
http://reply.papertrans.cn/15/1459/145860/145860_18.png
汇总
发表于 2025-3-24 22:51:11
Grundbegriffe und Grundtatbeständeare presented in terms of observations on drill wear and tap lifetime. Work-hardening is also discussed. A tool life criterion for worn drill replacement aimed at internal threading process optimisation is proposed and illustrated by a case-study.
傲慢物
发表于 2025-3-25 01:28:59
Grundbegriffe und Grundtatbestände+TiCN. Dry face milling experiments are performed with application to steel AISI-SAE 1045. A comparative performance evaluation of uncoated and coated inserts is provided on the base of flank wear measurements.