observatory
发表于 2025-3-23 10:19:25
Grundlagen eines Personalinformationssystemst. Additional alloying/microalloying effects are considered. Due to critical role of stability of retained austenite, the influence of various parameters is discussed including effect of annealing time, carbon and Mn content, as well as effect of grain size.
Mosaic
发表于 2025-3-23 17:36:50
http://reply.papertrans.cn/15/1457/145644/145644_12.png
Libido
发表于 2025-3-23 19:01:36
Nina FonsteinDetails the uses of physical metallurgy for optimization, adaptation and processing of steel to achieve required properties.Introduces the basics of processing AHSS by highlighting key parameters and
飓风
发表于 2025-3-24 00:13:59
http://image.papertrans.cn/a/image/145644.jpg
阴谋小团体
发表于 2025-3-24 06:04:52
Rainer Kasperzak,Christian Manfred Kellnern in fuel consumption, and therefore in car weight, and environment protection from CO. emission. Starting from 70s, the evolution of automotive steels included new and breakthrough development of steels grades with strength from initial ~350 to 2000 MPa. A few generations of developed steels are co
Obituary
发表于 2025-3-24 09:49:39
http://reply.papertrans.cn/15/1457/145644/145644_16.png
远足
发表于 2025-3-24 12:54:07
Die Achillesferse des Benford’s Law: KMUsfraction and hardness of martensite, ferrite grain size, and structure morphology) and various mechanical properties as yield and tensile strength, strain hardening, elongation, and reduction of area. Experimentally shown redistribution of strain depending on martensite strength explains limitation
修饰语
发表于 2025-3-24 16:45:37
http://reply.papertrans.cn/15/1457/145644/145644_18.png
扔掉掐死你
发表于 2025-3-24 19:12:42
Führungsmodelle als Gestaltungshilfenatment including roles of initial structure, annealing temperature, and parameters of isothermal bainite reaction is discussed. The relationship between microstructure and mechanical properties of TRIP steels including the strength, ductility, strain hardening, and baking hardenability is considered
熟练
发表于 2025-3-25 03:08:32
https://doi.org/10.1007/978-3-322-85432-2partially, by bainite. Relationship between microstructure and mechanical properties of CP steels is presented as well as recommended for processing parameters to obtain bainite fraction, keeping in mind effects of chemical composition on phase transformations. Effects of alloying/microalloying on m