Entreaty
发表于 2025-3-26 22:59:10
https://doi.org/10.1007/978-3-8349-8397-8d geometric design. Isogeometric analysis, just like FEM, is a method for solving partial differential equations and we use the same models introduced in Sec. 3.1 and the derived variational formulations shown in Sec. 3.2. Especially we can rely on the theoretical properties shown there and the Lax-
Confess
发表于 2025-3-27 02:02:53
https://doi.org/10.1007/978-3-8349-8397-8 Adaptive simulation is essential for simulating complex problems and using the available resources where they are needed. The uniform refinement techniques presented in the previous chapter turns out not to be flexible enough. In this chapter we will strongly rely on the previous section about isog
即席
发表于 2025-3-27 07:10:30
http://reply.papertrans.cn/15/1447/144653/144653_33.png
GIDDY
发表于 2025-3-27 09:49:12
Adam Abidin,Jenny H. Panchal,K. ThirumaranIn this chapter we will review some basics of applied geometry that are essential prerequisites for the following chapters. In particular, the concepts from computer aided geometric design (CAGD) are mandatory for isogeometric analysis, but we will also look at other prerequisites that in the same manner influence finite element analysis.
小平面
发表于 2025-3-27 15:45:56
http://reply.papertrans.cn/15/1447/144653/144653_35.png
泛滥
发表于 2025-3-27 19:28:15
http://reply.papertrans.cn/15/1447/144653/144653_36.png
分开
发表于 2025-3-28 01:03:17
10楼
Frenetic
发表于 2025-3-28 04:15:13
10楼